2008 Toyota Prius Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Toyota Prius, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Prius — Year-Specific Fitment Context
The 2008 Toyota Prius is in year 4 of 18 using the 5x100 pattern (2005–2022). Wheels from any 2005–2022 Toyota Prius are cross-compatible with the 2008 model. Across its full production run (2001–2024), the Prius has also used: 4x100, 5x114.3.
Toyota Prius Bolt Pattern by Year
The table below shows how the Prius's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 4x100 | 54.1 | 46 |
| 2002 | 4x100 | 54.1 | 46 |
| 2003 | 4x100 | 54.1 | 46 |
| 2004 | 4x100 | 54.1 | 46 |
| 2005 | 5x100 | 54.1 | 46 |
| 2006 | 5x100 | 54.1 | 46 |
| 2007 | 5x100 | 54.1 | 46 |
| ▸ 2008 | 5x100 | 54.1 | 46 |
| 2009 | 5x100 | 54.1 | 46 |
| 2010 | 5x100 | 54.1 | 46 |
| 2011 | 5x100 | 54.1 | 46 |
| 2012 | 5x100 | 54.1 | 46 |
| 2013 | 5x100 | 54.1 | 46 |
| 2014 | 5x100 | 54.1 | 46 |
| 2015 | 5x100 | 54.1 | 46 |
| 2016 | 5x100 | 54.1 | 46 |
| 2017 | 5x100 | 54.1 | 46 |
| 2018 | 5x100 | 54.1 | 46 |
| 2019 | 5x100 | 54.1 | 46 |
| 2020 | 5x100 | 54.1 | 45 |
| 2021 | 5x100 | 54.1 | 45 |
| 2022 | 5x100 | 54.1 | 45 |
| 2023 | 5x114.3 | 60.1 | 40 |
| 2024 | 5x114.3 | 60.1 | 40 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2008 Toyota Prius
For your 2008 Toyota Prius, the correct bolt pattern is 5x100 with a center bore of 54.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The recommended offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and proper seat type (conical/60-degree taper) to ensure safe clamping force. Avoid ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Prius appears from 2001 to 2024 (24 model years). Across model years, this model appears with 3 bolt patterns (4x100, 5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles to ensure proper seating.
- ✅ Avoid wheels with offset below 40mm to prevent tire rubbing on suspension components.
- ✅ Verify center bore; if larger than 54.1mm, use hub-centric rings to avoid vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Toyota Prius — Frequently Asked Questions
What is the bolt pattern for a 2008 Toyota Prius?
The 2008 Toyota Prius uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 46mm.
What other years of Toyota Prius have the same bolt pattern as the 2008?
The Toyota Prius uses the 5x100 pattern from 2005 through 2022. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Will wheels from another Toyota fit my 2008 Prius?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 54.1mm.
What lug nut size does the 2008 Toyota Prius use?
The 2008 Toyota Prius uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2008 Toyota Priuss use lug bolts or lug nuts?
The 2008 Prius requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2008 Toyota Prius?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Prius, the PCD is 5x100.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset