2019 Toyota Prius Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Toyota Prius, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 Prius — Year-Specific Fitment Context
The 2019 Toyota Prius is in year 15 of 18 using the 5x100 pattern (2005–2022). Wheels from any 2005–2022 Toyota Prius are cross-compatible with the 2019 model. Across its full production run (2001–2024), the Prius has also used: 4x100, 5x114.3.
Toyota Prius Bolt Pattern by Year
The table below shows how the Prius's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 4x100 | 54.1 | 46 |
| 2002 | 4x100 | 54.1 | 46 |
| 2003 | 4x100 | 54.1 | 46 |
| 2004 | 4x100 | 54.1 | 46 |
| 2005 | 5x100 | 54.1 | 46 |
| 2006 | 5x100 | 54.1 | 46 |
| 2007 | 5x100 | 54.1 | 46 |
| 2008 | 5x100 | 54.1 | 46 |
| 2009 | 5x100 | 54.1 | 46 |
| 2010 | 5x100 | 54.1 | 46 |
| 2011 | 5x100 | 54.1 | 46 |
| 2012 | 5x100 | 54.1 | 46 |
| 2013 | 5x100 | 54.1 | 46 |
| 2014 | 5x100 | 54.1 | 46 |
| 2015 | 5x100 | 54.1 | 46 |
| 2016 | 5x100 | 54.1 | 46 |
| 2017 | 5x100 | 54.1 | 46 |
| 2018 | 5x100 | 54.1 | 46 |
| ▸ 2019 | 5x100 | 54.1 | 46 |
| 2020 | 5x100 | 54.1 | 45 |
| 2021 | 5x100 | 54.1 | 45 |
| 2022 | 5x100 | 54.1 | 45 |
| 2023 | 5x114.3 | 60.1 | 40 |
| 2024 | 5x114.3 | 60.1 | 40 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2019 Toyota Prius
When selecting wheels for a 2019 Toyota Prius, the 54.1mm center bore is critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; the factory 46mm offset should be maintained within ±5mm to avoid rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts can lead to wheel loosening. Cross-compatible wheels from 2005–2022 Prius models share the 5x100 pattern, but verify bore and offset.
Historical Fitment Data Reference
In our dataset, Toyota Prius appears from 2001 to 2024 (24 model years). Across model years, this model appears with 3 bolt patterns (4x100, 5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 40mm or above 52mm to prevent fender rubbing or brake clearance issues.
- ✅ If using aftermarket wheels, always install hub-centric rings specifically for 54.1mm bore to prevent vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Toyota Prius — Frequently Asked Questions
What is the bolt pattern for a 2019 Toyota Prius?
The 2019 Toyota Prius uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 46mm.
What other years of Toyota Prius have the same bolt pattern as the 2019?
The Toyota Prius uses the 5x100 pattern from 2005 through 2022. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the factory wheel offset for a 2019 Toyota Prius?
The OEM offset for the 2019 Prius is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2019 Toyota Prius?
The factory center bore (hub bore) for the 2019 Toyota Prius is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Toyota fit my 2019 Prius?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 54.1mm.
Can I put aftermarket wheels on my 2019 Toyota Prius?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 46mm, and a center bore of at least 54.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset