2025 Toyota Prius Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota Prius is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 40-45, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2025 Toyota Prius Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 40-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Prius — Year-Specific Fitment Context
The 2025 Toyota Prius is in year 3 of 4 using the 5x114.3 pattern (2023–2026). Wheels from any 2023–2026 Toyota Prius are cross-compatible with the 2025 model. Across its full production run (2001–2026), the Prius has also used: 4x100, 5x100.
Toyota Prius Bolt Pattern by Year
Looking for all generations? View the complete Toyota Prius (2001–2026) Bolt Pattern & Generation Guide →
The table below shows how the Prius's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 4x100 | 54.1 | 46 |
| 2002 | 4x100 | 54.1 | 46 |
| 2003 | 4x100 | 54.1 | 46 |
| 2004 | 4x100 | 54.1 | 46 |
| 2005 | 5x100 | 54.1 | 46 |
| 2006 | 5x100 | 54.1 | 46 |
| 2007 | 5x100 | 54.1 | 46 |
| 2008 | 5x100 | 54.1 | 46 |
| 2009 | 5x100 | 54.1 | 46 |
| 2010 | 5x100 | 54.1 | 46 |
| 2011 | 5x100 | 54.1 | 46 |
| 2012 | 5x100 | 54.1 | 46 |
| 2013 | 5x100 | 54.1 | 46 |
| 2014 | 5x100 | 54.1 | 46 |
| 2015 | 5x100 | 54.1 | 46 |
| 2016 | 5x100 | 54.1 | 46 |
| 2017 | 5x100 | 54.1 | 46 |
| 2018 | 5x100 | 54.1 | 46 |
| 2019 | 5x100 | 54.1 | 46 |
| 2020 | 5x100 | 54.1 | 45 |
| 2021 | 5x100 | 54.1 | 45 |
| 2022 | 5x100 | 54.1 | 45 |
| 2023 | 5x114.3 | 60.1 | 40 |
| 2024 | 5x114.3 | 60.1 | 40 |
| ▸ 2025 | 5x114.3 | 60.1 | 40-45 |
| 2026 | 5x114.3 | 60.1 | 40-45 |
2025 Toyota Prius Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Toyota Prius, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Ram 1000 | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2008 Saturn VUE | 60.1 mm (Exact) | 40 | 12x1.5 (Cone) |
| 2016 Scion iM | 60.1 mm (Exact) | 35-45mm | M12x1.5 (Cone) |
| 2011 Scion tC | 60.1 mm (Exact) | 39 | 12x1.5 (Cone) |
| 2008 Scion xB | 60.1 mm (Exact) | 45 | 12x1.5 (Cone) |
| 2025 Subaru Solterra | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2008 MAZDA B-Series Regular Cab | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
| 2021 MAZDA CX-3 | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
| 2025 MAZDA CX-30 | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
| 2025 MAZDA CX-5 | 67.1 mm | 67.1mm → 60.1mm |
35-45 |
| 2025 MAZDA CX-50 | 67.1 mm | 67.1mm → 60.1mm |
35-45 |
| 2025 MAZDA CX-70 | 67.1 mm | 67.1mm → 60.1mm |
35-45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Toyota Prius — Frequently Asked Questions
What is the bolt pattern for a 2025 Toyota Prius?
The 2025 Toyota Prius uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40-45mm.
What other years of Toyota Prius have the same bolt pattern as the 2025?
The Toyota Prius uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2025 Toyota?
The 2025 Prius uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2025 Toyota Priuss use lug bolts or lug nuts?
The 2025 Prius requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2025 Toyota Prius use?
The 2025 Toyota Prius uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Toyota fit my 2025 Prius?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →