2009 Toyota Yaris Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Toyota Yaris, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2009 Yaris — Year-Specific Fitment Context
The 2009 Toyota Yaris is in year 3 of 14 using the 4x100 pattern (2007–2020). Wheels from any 2007–2020 Toyota Yaris are cross-compatible with the 2009 model.
Toyota Yaris Bolt Pattern by Year
The table below shows how the Yaris's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 4x100 | 54.1 | 46 |
| 2008 | 4x100 | 54.1 | 46 |
| ▸ 2009 | 4x100 | 54.1 | 46 |
| 2010 | 4x100 | 54.1 | 46 |
| 2011 | 4x100 | 54.1 | 46 |
| 2012 | 4x100 | 54.1 | 46 |
| 2013 | 4x100 | 54.1 | 40 |
| 2014 | 4x100 | 54.1 | 40 |
| 2015 | 4x100 | 54.1 | 40 |
| 2016 | 4x100 | 54.1 | 40 |
| 2017 | 4x100 | 54.1 | 40 |
| 2018 | 4x100 | 54.1 | 40 |
| 2019 | 4x100 | 54.1 | 40 |
| 2020 | 4x100 | 54.1 | 40 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2009 Toyota Yaris
For the 2009 Toyota Yaris, the 4x100 bolt pattern and 54.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree taper). Ball-seat or incorrect thread pitch can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset compatibility before purchase.
Historical Fitment Data Reference
In our dataset, Toyota Yaris appears from 2007 to 2020 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ For lowered Yaris models, offset closer to 40mm may be needed to clear suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Toyota Yaris — Frequently Asked Questions
What is the bolt pattern for a 2009 Toyota Yaris?
The 2009 Toyota Yaris uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 46mm.
What other years of Toyota Yaris have the same bolt pattern as the 2009?
The Toyota Yaris uses the 4x100 pattern from 2007 through 2020. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What is the factory wheel offset for a 2009 Toyota Yaris?
The OEM offset for the 2009 Yaris is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2009 Toyota Yariss use lug bolts or lug nuts?
The 2009 Yaris requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2009 Toyota Yaris?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2009 Toyota Yaris?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 54.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset