2010 Volkswagen Jetta Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Volkswagen Jetta, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 Jetta — Year-Specific Fitment Context
The 2010 Volkswagen Jetta is in year 6 of 20 using the 5x112 pattern (2005–2024). Wheels from any 2005–2024 Volkswagen Jetta are cross-compatible with the 2010 model. Across its full production run (1992–2024), the Jetta has also used: 4x100, 5x100.
Volkswagen Jetta Bolt Pattern by Year
The table below shows how the Jetta's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 57.1 | 38 |
| 1996 | 4x100 | 57.1 | 38 |
| 1997 | 4x100 | 57.1 | 38 |
| 1998 | 4x100 | 57.1 | 38 |
| 1999 | 5x100 | 57.1 | 38 |
| 2000 | 5x100 | 57.1 | 38 |
| 2001 | 5x100 | 57.1 | 38 |
| 2002 | 5x100 | 57.1 | 38 |
| 2003 | 5x100 | 57.1 | 38 |
| 2004 | 5x100 | 57.1 | 38 |
| 2005 | 5x112 | 57.1 | 50 |
| 2006 | 5x112 | 57.1 | 50 |
| 2007 | 5x112 | 57.1 | 50 |
| 2008 | 5x112 | 57.1 | 50 |
| 2009 | 5x112 | 57.1 | 50 |
| ▸ 2010 | 5x112 | 57.1 | 40-50 |
| 2011 | 5x112 | 57.1 | 40-50 |
| 2012 | 5x112 | 57.1 | 40-50 |
| 2013 | 5x112 | 57.1 | 40-50 |
| 2014 | 5x112 | 57.1 | 40-50 |
| 2015 | 5x112 | 57.1 | 40-50 |
| 2016 | 5x112 | 57.1 | 40-50 |
| 2017 | 5x112 | 57.1 | 40-50 |
| 2018 | 5x112 | 57.1 | 40-50 |
| 2019 | 5x112 | 57.1 | 40-50 |
| 2020 | 5x112 | 57.1 | 40-50 |
| 2021 | 5x112 | 57.1 | 40-50 |
| 2022 | 5x112 | 57.1 | 40-50 |
| 2023 | 5x112 | 57.1 | 40-50 |
| 2024 | 5x112 | 57.1 | 40-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2010 Volkswagen Jetta
For your 2010 Volkswagen Jetta, the 5x112 bolt pattern is shared with 2005–2024 models, ensuring broad cross-compatibility. Critical is the 57.1mm center bore: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 40-50mm; deviations risk rubbing or poor handling. Always use 14x1.5 lug nuts with the correct seat—either conical (60-degree) or ball seat, as VW typically uses ball seat. Mixing seat types can cause loosening or damage. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Volkswagen Jetta appears from 1992 to 2024 (30 model years). Across model years, this model appears with 3 bolt patterns (4x100, 5x100, 5x112).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 89 ft-lb after 50-100 miles of driving.
- ✅ Avoid using universal lug nuts; they may not seat properly on VW ball-seat wheels.
- ✅ Check for brake caliper clearance when fitting wider wheels, especially with low offset.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Volkswagen Jetta — Frequently Asked Questions
What is the bolt pattern for a 2010 Volkswagen Jetta?
The 2010 Volkswagen Jetta uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40-50mm.
What other years of Volkswagen Jetta have the same bolt pattern as the 2010?
The Volkswagen Jetta uses the 5x112 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What does 40-50mm offset mean for the 2010 Jetta?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volkswagen.
Can I use spacers on my 2010 Volkswagen Jetta?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the PCD for a 2010 Volkswagen Jetta?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Jetta, the PCD is 5x112.
What lug nut size does the 2010 Volkswagen Jetta use?
The 2010 Volkswagen Jetta uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset