2019 Volkswagen Jetta Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Volkswagen Jetta, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Jetta — Year-Specific Fitment Context
The 2019 Volkswagen Jetta is in year 15 of 20 using the 5x112 pattern (2005–2024). Wheels from any 2005–2024 Volkswagen Jetta are cross-compatible with the 2019 model. Across its full production run (1992–2024), the Jetta has also used: 4x100, 5x100.
Volkswagen Jetta Bolt Pattern by Year
The table below shows how the Jetta's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 57.1 | 38 |
| 1996 | 4x100 | 57.1 | 38 |
| 1997 | 4x100 | 57.1 | 38 |
| 1998 | 4x100 | 57.1 | 38 |
| 1999 | 5x100 | 57.1 | 38 |
| 2000 | 5x100 | 57.1 | 38 |
| 2001 | 5x100 | 57.1 | 38 |
| 2002 | 5x100 | 57.1 | 38 |
| 2003 | 5x100 | 57.1 | 38 |
| 2004 | 5x100 | 57.1 | 38 |
| 2005 | 5x112 | 57.1 | 50 |
| 2006 | 5x112 | 57.1 | 50 |
| 2007 | 5x112 | 57.1 | 50 |
| 2008 | 5x112 | 57.1 | 50 |
| 2009 | 5x112 | 57.1 | 50 |
| 2010 | 5x112 | 57.1 | 40-50 |
| 2011 | 5x112 | 57.1 | 40-50 |
| 2012 | 5x112 | 57.1 | 40-50 |
| 2013 | 5x112 | 57.1 | 40-50 |
| 2014 | 5x112 | 57.1 | 40-50 |
| 2015 | 5x112 | 57.1 | 40-50 |
| 2016 | 5x112 | 57.1 | 40-50 |
| 2017 | 5x112 | 57.1 | 40-50 |
| 2018 | 5x112 | 57.1 | 40-50 |
| ▸ 2019 | 5x112 | 57.1 | 40-50 |
| 2020 | 5x112 | 57.1 | 40-50 |
| 2021 | 5x112 | 57.1 | 40-50 |
| 2022 | 5x112 | 57.1 | 40-50 |
| 2023 | 5x112 | 57.1 | 40-50 |
| 2024 | 5x112 | 57.1 | 40-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 Volkswagen Jetta
For your 2019 Volkswagen Jetta, the 57.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 66.6mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range is 40-50mm; deviating outside this can cause rubbing or poor handling. Always use lug nuts with the correct 14x1.5 thread pitch and a conical (60-degree) or ball seat matching your wheels. Improper seating can lead to wheel loosening. Verify that aftermarket wheels are load-rated for the Jetta's weight. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Volkswagen Jetta appears from 1992 to 2024 (30 model years). Across model years, this model appears with 3 bolt patterns (4x100, 5x100, 5x112).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 88 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 57.1mm bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended lug bolts are properly seated and hub-centric.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Volkswagen Jetta — Frequently Asked Questions
What is the bolt pattern for a 2019 Volkswagen Jetta?
The 2019 Volkswagen Jetta uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40-50mm.
What other years of Volkswagen Jetta have the same bolt pattern as the 2019?
The Volkswagen Jetta uses the 5x112 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2019 Volkswagen?
The 2019 Jetta uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2019 Volkswagen Jetta?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How tight should I torque the lug nuts on a 2019 Volkswagen Jetta?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 40-50mm offset mean for the 2019 Jetta?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volkswagen.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset