2013 Acura RDX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Acura RDX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 RDX — Year-Specific Fitment Context
The 2013 Acura RDX is in year 7 of 18 using the 5x114.3 pattern (2007–2024). Wheels from any 2007–2024 Acura RDX are cross-compatible with the 2013 model.
Acura RDX Bolt Pattern by Year
The table below shows how the RDX's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 5x114.3 | 64.1 | 45 |
| 2008 | 5x114.3 | 64.1 | 45 |
| 2009 | 5x114.3 | 64.1 | 45 |
| 2010 | 5x114.3 | 64.1 | 45 |
| 2011 | 5x114.3 | 64.1 | 45 |
| 2012 | 5x114.3 | 64.1 | 45 |
| ▸ 2013 | 5x114.3 | 64.1 | 45 |
| 2014 | 5x114.3 | 64.1 | 45 |
| 2015 | 5x114.3 | 64.1 | 45 |
| 2016 | 5x114.3 | 64.1 | 45 |
| 2017 | 5x114.3 | 64.1 | 45 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2013 Acura RDX
The 2013 Acura RDX uses a 5x114.3 bolt pattern with a 64.1mm center bore. When fitting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct 12x1.5 thread pitch and seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Mismatched lug nuts can lead to wheel loosening. Verify lug nut engagement and torque to 80 ft-lbs. Safety first: improper fitment compromises vehicle handling.
Historical Fitment Data Reference
In our dataset, Acura RDX appears from 2007 to 2024 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub rings; they can cause vibration and stress on studs.
- ✅ Check for brake caliper clearance when using wheels with offset less than 40mm or greater than 50mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Acura RDX — Frequently Asked Questions
What is the bolt pattern for a 2013 Acura RDX?
The 2013 Acura RDX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura RDX have the same bolt pattern as the 2013?
The Acura RDX uses the 5x114.3 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2013 Acura?
The 2013 RDX uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2013 Acura RDX?
The factory center bore (hub bore) for the 2013 Acura RDX is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 64.1mm center bore important for the 2013 RDX?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2013 Acura RDX?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset