2008 Aston Martin DBS Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Aston Martin DBS, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | B 14x2.00 |
| Center Bore (CB) | 68.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 150 ft-lbs (204 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 DBS — Year-Specific Fitment Context
The 2008 model year marks the beginning of the Aston Martin DBS's 5x114.3 bolt pattern era, which continued through 2022 (15 consecutive years). Wheels from any 2008–2022 Aston Martin DBS are cross-compatible with the 2008 model.
Aston Martin DBS Bolt Pattern by Year
The table below shows how the DBS's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Aston Martin DBS
For the 2008 Aston Martin DBS, the 5x114.3 bolt pattern and 68.1mm center bore are critical. Aftermarket wheels must use hub-centric rings to avoid vibration and ensure proper load transfer. The offset is sensitive: stock is 42mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x2.00) and seat type—the DBS uses ball-seat lug nuts. Using incorrect taper (e.g., cone seat) can lead to wheel loosening. Re-torque after 50 miles and inspect for any interference.
Historical Fitment Data Reference
In our dataset, Aston Martin DBS appears from 2008 to 2022 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 lb-ft after 50 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore of at least 68.1mm; use hub-centric rings if larger.
- ✅ Check inner clearance for brake calipers and suspension components when changing offset.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Aston Martin DBS — Frequently Asked Questions
What is the bolt pattern for a 2008 Aston Martin DBS?
The 2008 Aston Martin DBS uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 68.1mm and the offset is 42mm.
What other years of Aston Martin DBS have the same bolt pattern as the 2008?
The Aston Martin DBS uses the 5x114.3 pattern from 2008 through 2022. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 Aston Martin DBS?
The OEM offset for the 2008 DBS is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2008 Aston Martin DBS use?
The 2008 Aston Martin DBS uses B 14x2.00 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Aston Martin fit my 2008 DBS?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 68.1mm.
What is the PCD for a 2008 Aston Martin DBS?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 DBS, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset