2025 Audi S8 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Audi S8 is 5x112. It has a center bore of 66.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Audi S8 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 S8 — Year-Specific Fitment Context
The 2025 Audi S8 is in year 25 of 26 using the 5x112 pattern (2001–2026). Wheels from any 2001–2026 Audi S8 are cross-compatible with the 2025 model.
Audi S8 Bolt Pattern by Year
Looking for all generations? View the complete Audi S8 (2001–2026) Bolt Pattern & Generation Guide →
The table below shows how the S8's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x112 | 57.1 | 42 |
| 2002 | 5x112 | 57.1 | 42 |
| 2003 | 5x112 | 57.1 | 42 |
| 2007 | 5x112 | 57.1 | 42 |
| 2008 | 5x112 | 57.1 | 42 |
| 2009 | 5x112 | 57.1 | 42 |
| 2013 | 5x112 | 66.6 | 42 |
| 2014 | 5x112 | 66.6 | 42 |
| 2015 | 5x112 | 66.6 | 42 |
| 2016 | 5x112 | 66.6 | 42 |
| 2017 | 5x112 | 66.6 | 42 |
| 2018 | 5x112 | 66.6 | 30-45 |
| 2020 | 5x112 | 66.6 | 30-45 |
| 2021 | 5x112 | 66.6 | 30-45 |
| 2022 | 5x112 | 66.6 | 30-45 |
| 2023 | 5x112 | 66.6 | 30-45 |
| 2024 | 5x112 | 66.6 | 30-45 |
| ▸ 2025 | 5x112 | 66.6 | 35-45 |
| 2026 | 5x112 | 66.6 | 35-45 |
2025 Audi S8 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 Audi S8, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Rolls-Royce Phantom | 66.6 mm (Exact) | 25-35 | 14x1.5 (Ball) |
| 2025 Rolls-Royce Spectre | 66.5 mm (Exact) | Not Applicable | 14x1.25 (Ball) |
| 2021 Rolls-Royce Wraith | 66.6 mm (Exact) | 25 | 14x1.25 (Ball) |
| 2025 Toyota GR Supra | 66.6 mm (Exact) | 30 | 14x1.25 (Flat/Mag) |
| 2024 Toyota Supra | 66.5 mm (Exact) | 30-40 | 14x1.25 (Ball) |
| 2009 Audi A4 | 66.6 mm (Exact) | 45 | B 14x1.50 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Audi S8 — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi S8?
The 2025 Audi S8 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35-45mm.
What other years of Audi S8 have the same bolt pattern as the 2025?
The Audi S8 uses the 5x112 pattern from 2001 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the center bore of a 2025 Audi S8?
The factory center bore (hub bore) for the 2025 Audi S8 is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2025 Audi S8?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 S8, the PCD is 5x112.
Will wheels from another Audi fit my 2025 S8?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Can I use spacers on my 2025 Audi S8?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →