2001 Audi S8 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Audi S8, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2001 S8 — Year-Specific Fitment Context
The 2001 model year marks the beginning of the Audi S8's 5x112 bolt pattern era, which continued through 2024 (24 consecutive years). Wheels from any 2001–2024 Audi S8 are cross-compatible with the 2001 model.
Audi S8 Bolt Pattern by Year
The table below shows how the S8's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2001 | 5x112 | 57.1 | 42 |
| 2002 | 5x112 | 57.1 | 42 |
| 2003 | 5x112 | 57.1 | 42 |
| 2007 | 5x112 | 57.1 | 42 |
| 2008 | 5x112 | 57.1 | 42 |
| 2009 | 5x112 | 57.1 | 42 |
| 2013 | 5x112 | 66.6 | 42 |
| 2014 | 5x112 | 66.6 | 42 |
| 2015 | 5x112 | 66.6 | 42 |
| 2016 | 5x112 | 66.6 | 42 |
| 2017 | 5x112 | 66.6 | 42 |
| 2018 | 5x112 | 66.5 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2001 Audi S8
For your 2001 Audi S8, the 5x112 bolt pattern is shared across 2001–2024 models, ensuring cross-compatibility. The 57.1mm center bore is critical: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure proper load distribution. Offset sensitivity is high; the stock 42mm offset maintains optimal scrub radius and suspension geometry. Deviations may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type (ball seat for OEM wheels). Using incorrect lug nuts can lead to wheel loosening. Safety first: re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Audi S8 appears from 2001 to 2024 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, always install hub-centric rings (57.1mm ID to wheel's CB) to avoid vibrations.
- ✅ Avoid spacers unless necessary; if used, ensure extended lug bolts with correct thread pitch and ball seat.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Audi S8 — Frequently Asked Questions
What is the bolt pattern for a 2001 Audi S8?
The 2001 Audi S8 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 42mm.
What other years of Audi S8 have the same bolt pattern as the 2001?
The Audi S8 uses the 5x112 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2001 Audi S8?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2001 Audi S8s use lug bolts or lug nuts?
The 2001 S8 requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2001 Audi S8?
The factory center bore (hub bore) for the 2001 Audi S8 is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2001 Audi S8?
The OEM offset for the 2001 S8 is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset