2024 Audi S8 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Audi S8, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 30-45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 S8 — Year-Specific Fitment Context
The 2024 model year is the final year of the Audi S8's 5x112 bolt pattern run (since 2001). Wheels from any 2001–2024 Audi S8 are cross-compatible with the 2024 model.
Audi S8 Bolt Pattern by Year
The table below shows how the S8's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x112 | 57.1 | 42 |
| 2002 | 5x112 | 57.1 | 42 |
| 2003 | 5x112 | 57.1 | 42 |
| 2007 | 5x112 | 57.1 | 42 |
| 2008 | 5x112 | 57.1 | 42 |
| 2009 | 5x112 | 57.1 | 42 |
| 2013 | 5x112 | 66.6 | 42 |
| 2014 | 5x112 | 66.6 | 42 |
| 2015 | 5x112 | 66.6 | 42 |
| 2016 | 5x112 | 66.6 | 42 |
| 2017 | 5x112 | 66.6 | 42 |
| 2018 | 5x112 | 66.5 | 30-45 |
| 2020 | 5x112 | 66.5 | 30-45 |
| 2021 | 5x112 | 66.5 | 30-45 |
| 2022 | 5x112 | 66.5 | 30-45 |
| 2023 | 5x112 | 66.5 | 30-45 |
| ▸ 2024 | 5x112 | 66.5 | 30-45 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2024 Audi S8
For the 2024 Audi S8, the 5x112 bolt pattern and 66.5mm center bore are critical. Aftermarket wheels must use hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 30-45mm; deviations risk rubbing or brake clearance issues. Always verify lug nut seat type: the S8 uses 14x1.5 ball-seat lug bolts. Using incorrect seat type (e.g., conical) can cause wheel loosening. This is the final year of the 5x112 pattern (2001-2024), so wheels from any compatible S8 will fit, but double-check offset and bore.
Historical Fitment Data Reference
In our dataset, Audi S8 appears from 2001 to 2024 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug bolts after 50 miles of driving to ensure proper seating.
- ✅ Avoid using conical-seat lug nuts; the S8 requires ball-seat (radius) lug bolts.
- ✅ If installing aftermarket wheels, always use hub-centric rings with 66.5mm inner diameter to match the hub.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Audi S8 — Frequently Asked Questions
What is the bolt pattern for a 2024 Audi S8?
The 2024 Audi S8 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 30-45mm.
What other years of Audi S8 have the same bolt pattern as the 2024?
The Audi S8 uses the 5x112 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I use spacers on my 2024 Audi S8?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.5mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How do I measure the bolt pattern on my 2024 Audi?
The 2024 S8 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2024 Audi S8?
The OEM offset for the 2024 S8 is typically around 30-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2024 Audi S8?
The factory center bore (hub bore) for the 2024 Audi S8 is 66.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset