2026 Audi S8 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Audi S8 is 5x112. It has a center bore of 66.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Audi S8 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 S8 — Year-Specific Fitment Context
The 2026 model year is the final year of the Audi S8's 5x112 bolt pattern run (since 2001). Wheels from any 2001–2026 Audi S8 are cross-compatible with the 2026 model.
Audi S8 Bolt Pattern by Year
Looking for all generations? View the complete Audi S8 (2001–2026) Bolt Pattern & Generation Guide →
The table below shows how the S8's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x112 | 57.1 | 42 |
| 2002 | 5x112 | 57.1 | 42 |
| 2003 | 5x112 | 57.1 | 42 |
| 2007 | 5x112 | 57.1 | 42 |
| 2008 | 5x112 | 57.1 | 42 |
| 2009 | 5x112 | 57.1 | 42 |
| 2013 | 5x112 | 66.6 | 42 |
| 2014 | 5x112 | 66.6 | 42 |
| 2015 | 5x112 | 66.6 | 42 |
| 2016 | 5x112 | 66.6 | 42 |
| 2017 | 5x112 | 66.6 | 42 |
| 2018 | 5x112 | 66.6 | 30-45 |
| 2020 | 5x112 | 66.6 | 30-45 |
| 2021 | 5x112 | 66.6 | 30-45 |
| 2022 | 5x112 | 66.6 | 30-45 |
| 2023 | 5x112 | 66.6 | 30-45 |
| 2024 | 5x112 | 66.6 | 30-45 |
| 2025 | 5x112 | 66.6 | 35-45 |
| ▸ 2026 | 5x112 | 66.6 | 35-45 |
2026 Audi S8 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Audi S8, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 BMW 760i | 66.6 mm (Exact) | 25-35 | 14x1.25 (Cone) |
| 2019 BMW 8 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW 840i | 66.6 mm (Exact) | 25-35 | 14x1.25 (Cone) |
| 2025 BMW Alpina B8 | 66.6 mm (Exact) | 25-35 | 14x1.25 (Cone) |
| 2019 BMW i3 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW i4 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Audi S8 — Frequently Asked Questions
What is the bolt pattern for a 2026 Audi S8?
The 2026 Audi S8 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35-45mm.
What other years of Audi S8 have the same bolt pattern as the 2026?
The Audi S8 uses the 5x112 pattern from 2001 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What lug nut size does the 2026 Audi S8 use?
The 2026 Audi S8 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 35-45mm offset mean for the 2026 S8?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
How tight should I torque the lug nuts on a 2026 Audi S8?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2026 Audi?
The 2026 S8 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →