2016 Audi TT Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Audi TT, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2016 TT — Year-Specific Fitment Context
The 2016 Audi TT is in year 9 of 16 using the 5x112 pattern (2008–2023). Wheels from any 2008–2023 Audi TT are cross-compatible with the 2016 model. Across its full production run (2000–2023), the TT has also used: 5x100.
Audi TT Bolt Pattern by Year
The table below shows how the TT's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 5x100 | 57.1 | 31 |
| 2001 | 5x100 | 57.1 | 31 |
| 2002 | 5x100 | 57.1 | 31 |
| 2003 | 5x100 | 57.1 | 31 |
| 2004 | 5x100 | 57.1 | 31 |
| 2005 | 5x100 | 57.1 | 31 |
| 2006 | 5x100 | 57.1 | 31 |
| 2008 | 5x112 | 57.1 | 50 |
| 2009 | 5x112 | 57.1 | 50 |
| 2010 | 5x112 | 57.1 | 50 |
| 2011 | 5x112 | 57.1 | 50 |
| 2012 | 5x112 | 57.1 | 50 |
| 2013 | 5x112 | 57.1 | 50 |
| 2014 | 5x112 | 57.1 | 50 |
| 2015 | 5x112 | 57.1 | 50 |
| ▸ 2016 | 5x112 | 57.1 | 50 |
| 2017 | 5x112 | 57.1 | 50 |
| 2018 | 5x112 | 66.6 | 38 |
| 2019 | 5x112 | 66.6 | 38 |
| 2020 | 5x112 | 66.6 | 38 |
| 2021 | 5x112 | 66.6 | 38 |
| 2022 | 5x112 | 66.6 | 38 |
| 2023 | 5x112 | 66.6 | 38 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2016 Audi TT
For the 2016 Audi TT, the bolt pattern is 5x112 with a center bore of 57.1mm. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely, preventing vibrations. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type—Audi uses ball seats, not conical. Using incorrect lug nuts can lead to wheel loosening. Wheels from 2008–2023 Audi TT models are direct fit, but avoid earlier 5x100 pattern wheels without adapters.
Historical Fitment Data Reference
In our dataset, Audi TT appears from 2000 to 2023 (23 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x112).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 19.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, confirm the hub bore is at least 57.1mm and use hub-centric rings to avoid vibrations.
- ✅ Avoid wheels with offset below 45mm on the front to prevent rubbing on the strut or fender liner.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Audi TT — Frequently Asked Questions
What is the bolt pattern for a 2016 Audi TT?
The 2016 Audi TT uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 50mm.
What other years of Audi TT have the same bolt pattern as the 2016?
The Audi TT uses the 5x112 pattern from 2008 through 2023. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2016 Audi TT?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 50mm, and a center bore of at least 57.1mm (using hub rings if larger).
What is the PCD for a 2016 Audi TT?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2016 TT, the PCD is 5x112.
What lug nut size does the 2016 Audi TT use?
The 2016 Audi TT uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 50mm offset mean for the 2016 TT?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset