2011 Audi TT Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Audi TT, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 TT — Year-Specific Fitment Context
The 2011 Audi TT is in year 4 of 16 using the 5x112 pattern (2008–2023). Wheels from any 2008–2023 Audi TT are cross-compatible with the 2011 model. Across its full production run (2000–2023), the TT has also used: 5x100.
Audi TT Bolt Pattern by Year
The table below shows how the TT's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 5x100 | 57.1 | 31 |
| 2001 | 5x100 | 57.1 | 31 |
| 2002 | 5x100 | 57.1 | 31 |
| 2003 | 5x100 | 57.1 | 31 |
| 2004 | 5x100 | 57.1 | 31 |
| 2005 | 5x100 | 57.1 | 31 |
| 2006 | 5x100 | 57.1 | 31 |
| 2008 | 5x112 | 57.1 | 50 |
| 2009 | 5x112 | 57.1 | 50 |
| 2010 | 5x112 | 57.1 | 50 |
| ▸ 2011 | 5x112 | 57.1 | 50 |
| 2012 | 5x112 | 57.1 | 50 |
| 2013 | 5x112 | 57.1 | 50 |
| 2014 | 5x112 | 57.1 | 50 |
| 2015 | 5x112 | 57.1 | 50 |
| 2016 | 5x112 | 57.1 | 50 |
| 2017 | 5x112 | 57.1 | 50 |
| 2018 | 5x112 | 66.6 | 38 |
| 2019 | 5x112 | 66.6 | 38 |
| 2020 | 5x112 | 66.6 | 38 |
| 2021 | 5x112 | 66.6 | 38 |
| 2022 | 5x112 | 66.6 | 38 |
| 2023 | 5x112 | 66.6 | 38 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2011 Audi TT
The 2011 Audi TT uses a 5x112 bolt pattern with a 57.1mm center bore. Aftermarket wheels must have a bore ≥57.1mm; use hub-centric rings to prevent vibration. Offset is critical: stock is 50mm, but 45-55mm is acceptable; lower offset pushes wheels outward, risking fender rub. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Audi uses ball seats, not conical. Mismatched seats cause wheel loosening. Re-torque after 50 miles. Avoid spacers without extended studs.
Historical Fitment Data Reference
In our dataset, Audi TT appears from 2000 to 2023 (23 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x112).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 19.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 120 Nm after 50 miles of driving.
- ✅ Verify wheel bore is ≥57.1mm; use hub-centric rings if larger.
- ✅ Check offset: 45-55mm safe; lower offset may require fender rolling.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Audi TT — Frequently Asked Questions
What is the bolt pattern for a 2011 Audi TT?
The 2011 Audi TT uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 50mm.
What other years of Audi TT have the same bolt pattern as the 2011?
The Audi TT uses the 5x112 pattern from 2008 through 2023. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the PCD for a 2011 Audi TT?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 TT, the PCD is 5x112.
Will wheels from another Audi fit my 2011 TT?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
Why is matching the 57.1mm center bore important for the 2011 TT?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2011 Audi TT use?
The 2011 Audi TT uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset