2009 Audi TT Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Audi TT, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x112
Lug Nut / Bolt Size B 14x1.50
Center Bore (CB) 57.1 mm
Offset (ET) 50
Torque Specs 100 ft-lbs (135 Nm)

2009 TT — Year-Specific Fitment Context

The 2009 Audi TT is in year 2 of 16 using the 5x112 pattern (2008–2023). Wheels from any 2008–2023 Audi TT are cross-compatible with the 2009 model. Across its full production run (2000–2023), the TT has also used: 5x100.

Audi TT Bolt Pattern by Year

The table below shows how the TT's wheel specifications have changed over the years. The 2009 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2000 5x100 57.1 31
2001 5x100 57.1 31
2002 5x100 57.1 31
2003 5x100 57.1 31
2004 5x100 57.1 31
2005 5x100 57.1 31
2006 5x100 57.1 31
2008 5x112 57.1 50
▸ 2009 5x112 57.1 50
2010 5x112 57.1 50
2011 5x112 57.1 50
2012 5x112 57.1 50
2013 5x112 57.1 50
2014 5x112 57.1 50
2015 5x112 57.1 50
2016 5x112 57.1 50
2017 5x112 57.1 50
2018 5x112 66.6 38
2019 5x112 66.6 38
2020 5x112 66.6 38
2021 5x112 66.6 38
2022 5x112 66.6 38
2023 5x112 66.6 38

Fitment Notes

The 2009 Audi TT has a bolt pattern of 5x112.

This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Audi TT appears from 2000 to 2023 (23 model years).

Across model years, this model appears with 2 bolt patterns (5x100, 5x112).

5x112 Pattern Context

This bolt pattern appears on 1490 vehicles in our current database and is considered common.

Examples of other vehicles using 5x112:

2009 Audi TT — Frequently Asked Questions

What is the bolt pattern for a 2009 Audi TT?

The 2009 Audi TT uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 50mm.

What other years of Audi TT have the same bolt pattern as the 2009?

The Audi TT uses the 5x112 pattern from 2008 through 2023. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.

How tight should I torque the lug nuts on a 2009 Audi TT?

Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Can I use spacers on my 2009 Audi TT?

Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.

Will wheels from another Audi fit my 2009 TT?

Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.

What is the factory wheel offset for a 2009 Audi TT?

The OEM offset for the 2009 TT is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Audi TT has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2009 Audi TT, please report it via our About page contact so we can verify and update this record.

Audi TT By Year

2000 2001 2002 2003 2004 2005 2006 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023

Other Audi Models

A3 Sportback e-tron A4 A4 allroad A6 allroad Q3 Q5 Q5 Sportback Quattro R8 RS 6 RS Q8 RS e-tron GT S3 S4 (2005.5) S7 S8 SQ5 TT allroad e-tron GT