2013 Audi TT Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Audi TT, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2013 TT — Year-Specific Fitment Context
The 2013 Audi TT is in year 6 of 16 using the 5x112 pattern (2008–2023). Wheels from any 2008–2023 Audi TT are cross-compatible with the 2013 model. Across its full production run (2000–2023), the TT has also used: 5x100.
Audi TT Bolt Pattern by Year
The table below shows how the TT's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 5x100 | 57.1 | 31 |
| 2001 | 5x100 | 57.1 | 31 |
| 2002 | 5x100 | 57.1 | 31 |
| 2003 | 5x100 | 57.1 | 31 |
| 2004 | 5x100 | 57.1 | 31 |
| 2005 | 5x100 | 57.1 | 31 |
| 2006 | 5x100 | 57.1 | 31 |
| 2008 | 5x112 | 57.1 | 50 |
| 2009 | 5x112 | 57.1 | 50 |
| 2010 | 5x112 | 57.1 | 50 |
| 2011 | 5x112 | 57.1 | 50 |
| 2012 | 5x112 | 57.1 | 50 |
| ▸ 2013 | 5x112 | 57.1 | 50 |
| 2014 | 5x112 | 57.1 | 50 |
| 2015 | 5x112 | 57.1 | 50 |
| 2016 | 5x112 | 57.1 | 50 |
| 2017 | 5x112 | 57.1 | 50 |
| 2018 | 5x112 | 66.6 | 38 |
| 2019 | 5x112 | 66.6 | 38 |
| 2020 | 5x112 | 66.6 | 38 |
| 2021 | 5x112 | 66.6 | 38 |
| 2022 | 5x112 | 66.6 | 38 |
| 2023 | 5x112 | 66.6 | 38 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2013 Audi TT
For your 2013 Audi TT, the bolt pattern is 5x112 with a 57.1mm center bore. Aftermarket wheels must match the bore exactly or use hub-centric rings to prevent vibration. The recommended offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (ball seat for OEM, cone seat for many aftermarket wheels). Improper lug nuts can lead to wheel loosening. Verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Audi TT appears from 2000 to 2023 (23 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x112).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 19.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, confirm they are hub-centric or use rings to avoid vibrations.
- ✅ Check inner clearance for offset changes; lower offset (e.g., 45mm) may require fender rolling.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Audi TT — Frequently Asked Questions
What is the bolt pattern for a 2013 Audi TT?
The 2013 Audi TT uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 50mm.
What other years of Audi TT have the same bolt pattern as the 2013?
The Audi TT uses the 5x112 pattern from 2008 through 2023. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What does 50mm offset mean for the 2013 TT?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Audi.
What is the center bore of a 2013 Audi TT?
The factory center bore (hub bore) for the 2013 Audi TT is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2013 Audi TT?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 50mm, and a center bore of at least 57.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2013 Audi?
The 2013 TT uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset