2016 Bentley Flying Spur Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Bentley Flying Spur, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 43 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2016 Flying Spur — Year-Specific Fitment Context
The 2016 Bentley Flying Spur is in year 3 of 9 using the 5x112 pattern (2014–2022). Wheels from any 2014–2022 Bentley Flying Spur are cross-compatible with the 2016 model.
Bentley Flying Spur Bolt Pattern by Year
The table below shows how the Flying Spur's wheel specifications have changed over the years. The 2016 model year is highlighted.
Fitment Notes
The 2016 Bentley Flying Spur has a bolt pattern of 5x112.
This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Bentley Flying Spur appears from 2014 to 2022 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 88.0 mm
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
2016 Bentley Flying Spur — Frequently Asked Questions
What is the bolt pattern for a 2016 Bentley Flying Spur?
The 2016 Bentley Flying Spur uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 43mm.
What other years of Bentley Flying Spur have the same bolt pattern as the 2016?
The Bentley Flying Spur uses the 5x112 pattern from 2014 through 2022. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What is the center bore of a 2016 Bentley Flying Spur?
The factory center bore (hub bore) for the 2016 Bentley Flying Spur is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2016 Bentley Flying Spur use?
The 2016 Bentley Flying Spur uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2016 Bentley Flying Spur?
The OEM offset for the 2016 Flying Spur is typically around 43mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2016 Bentley Flying Spur?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2016 Flying Spur, the PCD is 5x112.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Bentley Flying Spur is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2014-2022 (7 model years).
- Observed bolt-pattern variants: 1 (5x112).
- Observed total offset span across years: 88.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2016 Bentley Flying Spur, please report it via our About page contact so we can verify and update this record.