2011 BMW 1 Series Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 BMW 1 Series, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 1 Series — Year-Specific Fitment Context
The 2011 BMW 1 Series is in year 4 of 6 using the 5x120 pattern (2008–2013). Wheels from any 2008–2013 BMW 1 Series are cross-compatible with the 2011 model.
BMW 1 Series Bolt Pattern by Year
The table below shows how the 1 Series's wheel specifications have changed over the years. The 2011 model year is highlighted.
Fitment Notes
The 2011 BMW 1 Series has a bolt pattern of 5x120.
This means it is a 5 lug pattern with a circle diameter of 120mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, BMW 1 Series appears from 2008 to 2013 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
2011 BMW 1 Series — Frequently Asked Questions
What is the bolt pattern for a 2011 BMW 1 Series?
The 2011 BMW 1 Series uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 42mm.
What other years of BMW 1 Series have the same bolt pattern as the 2011?
The BMW 1 Series uses the 5x120 pattern from 2008 through 2013. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What does 42mm offset mean for the 2011 1 Series?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your BMW.
How do I measure the bolt pattern on my 2011 BMW?
The 2011 1 Series uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2011 BMW 1 Series?
The OEM offset for the 2011 1 Series is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2011 BMW 1 Seriess use lug bolts or lug nuts?
The 2011 1 Series requires B 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
BMW 1 Series is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2008-2013 (6 model years).
- Observed bolt-pattern variants: 1 (5x120).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2011 BMW 1 Series, please report it via our About page contact so we can verify and update this record.