2017 BMW 4 Series Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 BMW 4 Series, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 72.56 mm |
| Offset (ET) | 30-40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 4 Series — Year-Specific Fitment Context
The 2017 BMW 4 Series is in year 4 of 5 using the 5x120 pattern (2014–2018). Wheels from any 2014–2018 BMW 4 Series are cross-compatible with the 2017 model. Across its full production run (2014–2024), the 4 Series has also used: 5x112.
BMW 4 Series Bolt Pattern by Year
The table below shows how the 4 Series's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2017 BMW 4 Series
When selecting wheels for a 2017 BMW 4 Series, the 5x120 bolt pattern is standard, but the 72.56mm center bore is critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 30-40mm; deviations risk rubbing or clearance issues with brakes and suspension. Always use lug nuts with the correct 14x1.25 thread pitch and proper seat type—BMW typically uses ball seats, but aftermarket wheels may require conical (60-degree) seats. Mixing seat types can cause wheel loosening. Verify lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, BMW 4 Series appears from 2014 to 2024 (11 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration at highway speeds.
- ✅ Check brake caliper clearance when using wheels with offset near 30mm, as some aftermarket designs may interfere.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 BMW 4 Series — Frequently Asked Questions
What is the bolt pattern for a 2017 BMW 4 Series?
The 2017 BMW 4 Series uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.56mm and the offset is 30-40mm.
What other years of BMW 4 Series have the same bolt pattern as the 2017?
The BMW 4 Series uses the 5x120 pattern from 2014 through 2018. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
Will wheels from another BMW fit my 2017 4 Series?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 72.56mm.
What lug nut size does the 2017 BMW 4 Series use?
The 2017 BMW 4 Series uses 14x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2017 BMW 4 Series?
The OEM offset for the 2017 4 Series is typically around 30-40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 30-40mm offset mean for the 2017 4 Series?
An offset of 30-40mm means the wheel's mounting surface is 30-40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your BMW.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset