2007 BMW 7 Series Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 BMW 7 Series, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 20 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 7 Series — Year-Specific Fitment Context
The 2007 BMW 7 Series is in year 16 of 25 using the 5x120 pattern (1992–2016). Wheels from any 1992–2016 BMW 7 Series are cross-compatible with the 2007 model. Across its full production run (1992–2024), the 7 Series has also used: 5x112.
BMW 7 Series Bolt Pattern by Year
The table below shows how the 7 Series's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120 | 72.6 | 20 |
| 1993 | 5x120 | 72.6 | 20 |
| 1994 | 5x120 | 72.6 | 20 |
| 1995 | 5x120 | 72.6 | 20 |
| 1996 | 5x120 | 72.6 | 20 |
| 1997 | 5x120 | 72.6 | 20 |
| 1998 | 5x120 | 72.6 | 20 |
| 1999 | 5x120 | 72.6 | 20 |
| 2000 | 5x120 | 72.6 | 20 |
| 2001 | 5x120 | 72.6 | 20 |
| 2002 | 5x120 | 72.6 | 20 |
| 2003 | 5x120 | 72.6 | 20 |
| 2004 | 5x120 | 72.6 | 20 |
| 2005 | 5x120 | 72.6 | 20 |
| 2006 | 5x120 | 72.6 | 20 |
| ▸ 2007 | 5x120 | 72.6 | 20 |
| 2008 | 5x120 | 72.6 | 20 |
| 2009 | 5x120 | 72.6 | 20 |
| 2010 | 5x120 | 72.6 | 20 |
| 2011 | 5x120 | 72.6 | 20 |
| 2012 | 5x120 | 72.6 | 20 |
| 2013 | 5x120 | 72.6 | 20 |
| 2014 | 5x120 | 72.6 | 20 |
| 2015 | 5x120 | 72.6 | 20 |
| 2016 | 5x120 | 72.6 | 20 |
| 2017 | 5x112 | 66.5 | 30 front 40 rear |
| 2018 | 5x112 | 66.5 | 30 front 40 rear |
| 2019 | 5x112 | 66.5 | 30 front 40 rear |
| 2020 | 5x112 | 66.6 | 25-40 |
| 2021 | 5x112 | 66.6 | 25-40 |
| 2022 | 5x112 | 66.6 | 25-40 |
| 2023 | 5x112 | 66.6 | 25-40 |
| 2024 | 5x112 | 66.6 | 25-40 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2007 BMW 7 Series
For the 2007 BMW 7 Series, the 5x120 bolt pattern and 72.6mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive; a 20mm range is typical, but deviations can cause rubbing or clearance issues. Always verify offset against your specific model. Lug nuts must be 12x1.50 with a ball seat (radius) – never use conical/tapered seat nuts, as they can damage the wheel. Re-torque after 50 miles. Wheels from 1992–2016 7 Series are direct fit.
Historical Fitment Data Reference
In our dataset, BMW 7 Series appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a bore larger than 72.6mm to avoid vibrations.
- ✅ Stick to offset within 20mm of stock; lower offset may rub fenders, higher may contact suspension.
- ✅ Re-torque lug nuts to 88 lb-ft after 50 miles; use a torque wrench to prevent over-tightening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 BMW 7 Series — Frequently Asked Questions
What is the bolt pattern for a 2007 BMW 7 Series?
The 2007 BMW 7 Series uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 20mm.
What other years of BMW 7 Series have the same bolt pattern as the 2007?
The BMW 7 Series uses the 5x120 pattern from 1992 through 2016. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Why is matching the 72.6mm center bore important for the 2007 7 Series?
The 72.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2007 BMW 7 Series?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 20mm, and a center bore of at least 72.6mm (using hub rings if larger).
How do I measure the bolt pattern on my 2007 BMW?
The 2007 7 Series uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2007 BMW 7 Series?
The factory center bore (hub bore) for the 2007 BMW 7 Series is 72.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset