2011 BMW 7 Series Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 BMW 7 Series, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 20 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 7 Series — Year-Specific Fitment Context
The 2011 BMW 7 Series is in year 20 of 25 using the 5x120 pattern (1992–2016). Wheels from any 1992–2016 BMW 7 Series are cross-compatible with the 2011 model. Across its full production run (1992–2024), the 7 Series has also used: 5x112.
BMW 7 Series Bolt Pattern by Year
The table below shows how the 7 Series's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120 | 72.6 | 20 |
| 1993 | 5x120 | 72.6 | 20 |
| 1994 | 5x120 | 72.6 | 20 |
| 1995 | 5x120 | 72.6 | 20 |
| 1996 | 5x120 | 72.6 | 20 |
| 1997 | 5x120 | 72.6 | 20 |
| 1998 | 5x120 | 72.6 | 20 |
| 1999 | 5x120 | 72.6 | 20 |
| 2000 | 5x120 | 72.6 | 20 |
| 2001 | 5x120 | 72.6 | 20 |
| 2002 | 5x120 | 72.6 | 20 |
| 2003 | 5x120 | 72.6 | 20 |
| 2004 | 5x120 | 72.6 | 20 |
| 2005 | 5x120 | 72.6 | 20 |
| 2006 | 5x120 | 72.6 | 20 |
| 2007 | 5x120 | 72.6 | 20 |
| 2008 | 5x120 | 72.6 | 20 |
| 2009 | 5x120 | 72.6 | 20 |
| 2010 | 5x120 | 72.6 | 20 |
| ▸ 2011 | 5x120 | 72.6 | 20 |
| 2012 | 5x120 | 72.6 | 20 |
| 2013 | 5x120 | 72.6 | 20 |
| 2014 | 5x120 | 72.6 | 20 |
| 2015 | 5x120 | 72.6 | 20 |
| 2016 | 5x120 | 72.6 | 20 |
| 2017 | 5x112 | 66.5 | 30 front 40 rear |
| 2018 | 5x112 | 66.5 | 30 front 40 rear |
| 2019 | 5x112 | 66.5 | 30 front 40 rear |
| 2020 | 5x112 | 66.6 | 25-40 |
| 2021 | 5x112 | 66.6 | 25-40 |
| 2022 | 5x112 | 66.6 | 25-40 |
| 2023 | 5x112 | 66.6 | 25-40 |
| 2024 | 5x112 | 66.6 | 25-40 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2011 BMW 7 Series
The 2011 BMW 7 Series uses a 5x120 bolt pattern with a 72.6mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to match the factory bore, preventing vibrations and ensuring proper load distribution. The offset is sensitive; the factory range is around 20mm, but deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: this model requires 12x1.50 thread pitch with ball-seat lug nuts. Using incorrect seat type (e.g., conical) can lead to wheel loosening. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, BMW 7 Series appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100-110 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels from 5x112 applications without adapters; they are not compatible.
- ✅ Check inner clearance for aftermarket wheels; the 2011 7 Series has limited space for large brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 BMW 7 Series — Frequently Asked Questions
What is the bolt pattern for a 2011 BMW 7 Series?
The 2011 BMW 7 Series uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 20mm.
What other years of BMW 7 Series have the same bolt pattern as the 2011?
The BMW 7 Series uses the 5x120 pattern from 1992 through 2016. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I use spacers on my 2011 BMW 7 Series?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 72.6mm center bore. Also verify that you have enough thread engagement for your B 12x1.50 hardware.
What is the PCD for a 2011 BMW 7 Series?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 7 Series, the PCD is 5x120.
Do 2011 BMW 7 Seriess use lug bolts or lug nuts?
The 2011 7 Series requires B 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another BMW fit my 2011 7 Series?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 72.6mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset