2007 BMW Alpina B7 Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 BMW Alpina B7, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x120
Lug Nut / Bolt Size 12x1.5
Center Bore (CB) 72.56 mm
Offset (ET) 30-40
Torque Specs 80 ft-lbs (108 Nm)

2007 Alpina B7 — Year-Specific Fitment Context

The 2007 model year marks the beginning of the BMW Alpina B7's 5x120 bolt pattern era, which continued through 2008 (2 consecutive years). Wheels from any 2007–2008 BMW Alpina B7 are cross-compatible with the 2007 model.

BMW Alpina B7 Bolt Pattern by Year

The table below shows how the Alpina B7's wheel specifications have changed over the years. The 2007 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2007 5x120 72.56 30-40
2008 5x120 72.56 30-40

Fitment Notes

The 2007 BMW Alpina B7 has a bolt pattern of 5x120.

This means it is a 5 lug pattern with a circle diameter of 120mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, BMW Alpina B7 appears from 2007 to 2008 (2 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x120 Pattern Context

This bolt pattern appears on 633 vehicles in our current database and is considered common.

Examples of other vehicles using 5x120:

2007 BMW Alpina B7 — Frequently Asked Questions

What is the bolt pattern for a 2007 BMW Alpina B7?

The 2007 BMW Alpina B7 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.56mm and the offset is 30-40mm.

What other years of BMW Alpina B7 have the same bolt pattern as the 2007?

The BMW Alpina B7 uses the 5x120 pattern from 2007 through 2008. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.

What lug nut size does the 2007 BMW Alpina B7 use?

The 2007 BMW Alpina B7 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

How do I measure the bolt pattern on my 2007 BMW?

The 2007 Alpina B7 uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

Will wheels from another BMW fit my 2007 Alpina B7?

Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 72.56mm.

Can I put aftermarket wheels on my 2007 BMW Alpina B7?

Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 30-40mm, and a center bore of at least 72.56mm (using hub rings if larger).

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

BMW Alpina B7 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2007 BMW Alpina B7, please report it via our About page contact so we can verify and update this record.

BMW Alpina B7 By Year

2007 2008

Other BMW Models

1 Series Alpina B7 M M2 M3 M4 M5 M8 X4 X5 X6 M X7 Z3 Z4 Z8 i4 i5 i7 i8 iX