2017 Buick Envision Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Buick Envision, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 70.2 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2017 Envision — Year-Specific Fitment Context
The 2017 Buick Envision is in year 2 of 9 using the 5x115 pattern (2016–2024). Wheels from any 2016–2024 Buick Envision are cross-compatible with the 2017 model.
Buick Envision Bolt Pattern by Year
The table below shows how the Envision's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2017 Buick Envision
For your 2017 Buick Envision, the bolt pattern is 5x115 with a critical center bore of 70.2mm. Aftermarket wheels often have a larger bore, so hub-centric rings (70.2mm ID to your wheel's bore) are essential to prevent vibrations and ensure proper load distribution. The offset range is 35-45mm; deviating outside this can cause rubbing or clearance issues with suspension and brakes. Always use M12x1.5 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat, while aftermarket may require ball or conical. Never mix seat types; improper seating can lead to wheel loss. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Buick Envision appears from 2016 to 2024 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, verify that the wheel's center bore is at least 70.2mm; use hub-centric rings if larger.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and do not exceed 5mm to maintain safe thread engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Buick Envision — Frequently Asked Questions
What is the bolt pattern for a 2017 Buick Envision?
The 2017 Buick Envision uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.2mm and the offset is 35-45mmmm.
What other years of Buick Envision have the same bolt pattern as the 2017?
The Buick Envision uses the 5x115 pattern from 2016 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
Can I use spacers on my 2017 Buick Envision?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 70.2mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
What is the factory wheel offset for a 2017 Buick Envision?
The OEM offset for the 2017 Envision is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2017 Buick?
The 2017 Envision uses a 5x115 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2017 Buick Envisions use lug bolts or lug nuts?
The 2017 Envision requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset