2026 Buick Envision Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Buick Envision is 5x115. It has a center bore of 70.2 mm, an offset range of 38-42, and utilizes 12x1.5 (Cone seat, 19mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 Buick Envision Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Center Bore (Hub Bore) | 70.2 mm |
| Offset Range (ET) | 38-42 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
2026 Envision — Year-Specific Fitment Context
The 2026 model year is the final year of the Buick Envision's 5x115 bolt pattern run (since 2016). Wheels from any 2016–2026 Buick Envision are cross-compatible with the 2026 model.
Buick Envision Bolt Pattern by Year
Looking for all generations? View the complete Buick Envision (2016–2026) Bolt Pattern & Generation Guide →
The table below shows how the Envision's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Buick Envision Wheel Interchange & Donor Fitment Guide (5x115)
The 5x115 bolt pattern is shared by 473 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Buick Envision, donor rims must match the 5x115 PCD and have a center bore of at least 70.2 mm:
DIRECT HUB MATCH Same 5x115 Pattern & Exact 70.2mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Chevrolet Malibu | 70.3 mm (Exact) | 40 | 12x1.5 (Cone) |
| 2016 Chevrolet Malibu Limited | 70.3 mm (Exact) | 40 | 12x1.5 (Cone) |
| 2024 Chevrolet TrailBlazer | 70.2 mm (Exact) | 50 | 12x1.5 (Cone) |
| 2024 Chevrolet Trax | 70.2 mm (Exact) | 40-46 | 12x1.5 (Cone) |
| 2018 GMC Terrain | 70.3 mm (Exact) | 40 | 12x1.5 (Cone) |
| 1998 Oldsmobile Cutlass | 70.3 mm (Exact) | 42 | N 12x1.50 (Cone) |
HUB RING FITMENT Same 5x115 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2005 Chrysler 300 | 71.6 mm | 71.6mm → 70.2mm |
24 |
| 2010 Dodge Charger | 71.5 mm | 71.5mm → 70.2mm |
22 |
| 2006 Cadillac STS | 71.6 mm | 71.6mm → 70.2mm |
42 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Buick Envision — Frequently Asked Questions
What is the bolt pattern for a 2026 Buick Envision?
The 2026 Buick Envision uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.2mm and the offset is 38-42mm.
What other years of Buick Envision have the same bolt pattern as the 2026?
The Buick Envision uses the 5x115 pattern from 2016 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Will wheels from another Buick fit my 2026 Envision?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.2mm.
What is the center bore of a 2026 Buick Envision?
The factory center bore (hub bore) for the 2026 Buick Envision is 70.2mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2026 Buick Envisions use lug bolts or lug nuts?
The 2026 Envision requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2026 Buick Envision use?
The 2026 Buick Envision uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →