2006 Buick Lucerne Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Buick Lucerne, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 40-50mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 Lucerne — Year-Specific Fitment Context
The 2006 model year marks the beginning of the Buick Lucerne's 5x115 bolt pattern era, which continued through 2011 (6 consecutive years). Wheels from any 2006–2011 Buick Lucerne are cross-compatible with the 2006 model.
Buick Lucerne Bolt Pattern by Year
The table below shows how the Lucerne's wheel specifications have changed over the years. The 2006 model year is highlighted.
Fitment Notes
The 2006 Buick Lucerne has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Buick Lucerne appears from 2006 to 2011 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2006 Buick Lucerne — Frequently Asked Questions
What is the bolt pattern for a 2006 Buick Lucerne?
The 2006 Buick Lucerne uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 40-50mmmm.
What other years of Buick Lucerne have the same bolt pattern as the 2006?
The Buick Lucerne uses the 5x115 pattern from 2006 through 2011. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Why is matching the 70.3mm center bore important for the 2006 Lucerne?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2006 Buick Lucerne?
The OEM offset for the 2006 Lucerne is typically around 40-50mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Buick fit my 2006 Lucerne?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
What lug nut size does the 2006 Buick Lucerne use?
The 2006 Buick Lucerne uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Buick Lucerne is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2006-2011 (6 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 90.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2006 Buick Lucerne, please report it via our About page contact so we can verify and update this record.