2019 Cadillac ATS-V Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Cadillac ATS-V, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 ATS-V — Year-Specific Fitment Context
The 2019 model year is the final year of the Cadillac ATS-V's 5x120.65 bolt pattern run (since 2016). Wheels from any 2016–2019 Cadillac ATS-V are cross-compatible with the 2019 model.
Cadillac ATS-V Bolt Pattern by Year
The table below shows how the ATS-V's wheel specifications have changed over the years. The 2019 model year is highlighted.
Fitment Notes
The 2019 Cadillac ATS-V has a bolt pattern of 5x120.65.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.75" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.75".
This means it is a 5 lug pattern with a circle diameter of 120.65mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Cadillac ATS-V appears from 2016 to 2019 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
2019 Cadillac ATS-V — Frequently Asked Questions
What is the bolt pattern for a 2019 Cadillac ATS-V?
The 2019 Cadillac ATS-V uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35mm.
What other years of Cadillac ATS-V have the same bolt pattern as the 2019?
The Cadillac ATS-V uses the 5x120.65 pattern from 2016 through 2019. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the center bore of a 2019 Cadillac ATS-V?
The factory center bore (hub bore) for the 2019 Cadillac ATS-V is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2019 Cadillac ATS-V?
Yes, but ensure the wheel spacers match the 5x120.65 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
What does 35mm offset mean for the 2019 ATS-V?
An offset of 35mm means the wheel's mounting surface is 35mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Cadillac.
What is the factory wheel offset for a 2019 Cadillac ATS-V?
The OEM offset for the 2019 ATS-V is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Cadillac ATS-V is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2016-2019 (4 model years).
- Observed bolt-pattern variants: 1 (5x120.65).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2019 Cadillac ATS-V, please report it via our About page contact so we can verify and update this record.