2019 Cadillac CT6-V Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Cadillac CT6-V, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x120.65 (5x4.75")
Lug Nut / Bolt Size N 14x1.50
Center Bore (CB) 67.1 mm
Offset (ET) 32
Torque Specs 100 ft-lbs (135 Nm)

2019 CT6-V — Year-Specific Fitment Context

The 2019 is the only model year of the Cadillac CT6-V in our database using the 5x120.65 bolt pattern. Important: starting in 2020, Cadillac switched to 5x120 — those wheels will not fit the 2019 model. Across its full production run (2019–2020), the CT6-V has also used: 5x120.

Cadillac CT6-V Bolt Pattern by Year

The table below shows how the CT6-V's wheel specifications have changed over the years. The 2019 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2019 5x120.65 67.1 32
2020 5x120 66.9 30-40mm

Fitment Notes

The 2019 Cadillac CT6-V has a bolt pattern of 5x120.65.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.75" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.75".

This means it is a 5 lug pattern with a circle diameter of 120.65mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Cadillac CT6-V appears from 2019 to 2020 (2 model years).

Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).

5x120.65 Pattern Context

This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 5x120.65:

2019 Cadillac CT6-V — Frequently Asked Questions

What is the bolt pattern for a 2019 Cadillac CT6-V?

The 2019 Cadillac CT6-V uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 32mm.

Will 2020 Cadillac CT6-V wheels fit a 2019 model?

No. The 2020 Cadillac CT6-V switched to a 5x120 bolt pattern, which is not compatible with the 2019 model's 5x120.65. Using mismatched patterns is unsafe.

Will wheels from another Cadillac fit my 2019 CT6-V?

Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.

What is the center bore of a 2019 Cadillac CT6-V?

The factory center bore (hub bore) for the 2019 Cadillac CT6-V is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

What is the PCD for a 2019 Cadillac CT6-V?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 CT6-V, the PCD is 5x120.65.

Can I use spacers on my 2019 Cadillac CT6-V?

Yes, but ensure the wheel spacers match the 5x120.65 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Cadillac CT6-V has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2019 Cadillac CT6-V, please report it via our About page contact so we can verify and update this record.

Cadillac CT6-V By Year

2019 2020

Other Cadillac Models

ATS ATS-V Brougham CT4 CT6 CTS CTS-V Catera Celestiq Eldorado Escalade Escalade EXT Escalade IQ LYRIQ OPTIQ STS Seville Vistiq XLR XT6