2020 Cadillac CT6-V Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Cadillac CT6-V, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x120
Lug Nut / Bolt Size M14x1.5
Center Bore (CB) 66.9 mm
Offset (ET) 30-40mm
Torque Specs 100 ft-lbs (135 Nm)

2020 CT6-V — Year-Specific Fitment Context

The 2020 is the only model year of the Cadillac CT6-V in our database using the 5x120 bolt pattern. Note: the 2019 model used a different pattern (5x120.65), so its wheels are NOT interchangeable with the 2020. Across its full production run (2019–2020), the CT6-V has also used: 5x120.65.

Cadillac CT6-V Bolt Pattern by Year

The table below shows how the CT6-V's wheel specifications have changed over the years. The 2020 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2019 5x120.65 67.1 32
▸ 2020 5x120 66.9 30-40mm

Fitment Notes

The 2020 Cadillac CT6-V has a bolt pattern of 5x120.

This means it is a 5 lug pattern with a circle diameter of 120mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Cadillac CT6-V appears from 2019 to 2020 (2 model years).

Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).

5x120 Pattern Context

This bolt pattern appears on 633 vehicles in our current database and is considered common.

Examples of other vehicles using 5x120:

2020 Cadillac CT6-V — Frequently Asked Questions

What is the bolt pattern for a 2020 Cadillac CT6-V?

The 2020 Cadillac CT6-V uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 30-40mmmm.

Can I use 2019 Cadillac CT6-V wheels on a 2020?

No. The 2019 CT6-V used a 5x120.65 bolt pattern, which differs from the 2020's 5x120. They are not interchangeable.

How tight should I torque the lug nuts on a 2020 Cadillac CT6-V?

Refer to your owner's manual for exact specs, but always tighten the M14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Do 2020 Cadillac CT6-Vs use lug bolts or lug nuts?

The 2020 CT6-V requires M14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What is the factory wheel offset for a 2020 Cadillac CT6-V?

The OEM offset for the 2020 CT6-V is typically around 30-40mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Can I put aftermarket wheels on my 2020 Cadillac CT6-V?

Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 30-40mmmm, and a center bore of at least 66.9mm (using hub rings if larger).

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Cadillac CT6-V has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2020 Cadillac CT6-V, please report it via our About page contact so we can verify and update this record.

Cadillac CT6-V By Year

2019 2020

Other Cadillac Models

ATS-V Allante CT5 CTS-V DTS DeVille ELR Escalade Escalade ESV Escalade EXT Escalade IQ Fleetwood LYRIQ SRX STS Seville Vistiq XLR XT4 XT6