2017 Cadillac CT6 Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Cadillac CT6, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x120.65 (5x4.75")
Lug Nut / Bolt Size N 14x1.50
Center Bore (CB) 67.1 mm
Offset (ET) 32
Torque Specs 100 ft-lbs (135 Nm)

2017 CT6 — Year-Specific Fitment Context

The 2017 Cadillac CT6 is in year 2 of 4 using the 5x120.65 pattern (2016–2019). Wheels from any 2016–2019 Cadillac CT6 are cross-compatible with the 2017 model. Across its full production run (2016–2020), the CT6 has also used: 5x120.

Cadillac CT6 Bolt Pattern by Year

The table below shows how the CT6's wheel specifications have changed over the years. The 2017 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2016 5x120.65 67.1 32
▸ 2017 5x120.65 67.1 32
2018 5x120.65 67.1 32
2019 5x120.65 67.1 32
2020 5x120 66.9 30-40mm

Fitment Notes

The 2017 Cadillac CT6 has a bolt pattern of 5x120.65.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.75" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.75".

This means it is a 5 lug pattern with a circle diameter of 120.65mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Cadillac CT6 appears from 2016 to 2020 (5 model years).

Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).

5x120.65 Pattern Context

This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 5x120.65:

2017 Cadillac CT6 — Frequently Asked Questions

What is the bolt pattern for a 2017 Cadillac CT6?

The 2017 Cadillac CT6 uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 32mm.

What other years of Cadillac CT6 have the same bolt pattern as the 2017?

The Cadillac CT6 uses the 5x120.65 pattern from 2016 through 2019. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.

How do I measure the bolt pattern on my 2017 Cadillac?

The 2017 CT6 uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

Why is matching the 67.1mm center bore important for the 2017 CT6?

The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

Will wheels from another Cadillac fit my 2017 CT6?

Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.

How tight should I torque the lug nuts on a 2017 Cadillac CT6?

Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Cadillac CT6 has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2017 Cadillac CT6, please report it via our About page contact so we can verify and update this record.

Cadillac CT6 By Year

2016 2017 2018 2019 2020

Other Cadillac Models

ATS-V Allante CT5 CT6-V CTS CTS-V Catera Celestiq DTS ELR Eldorado Escalade Escalade IQ Fleetwood LYRIQ OPTIQ SRX STS Seville XT5