2000 Chevrolet 2500 HD Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Chevrolet 2500 HD Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20-40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2000 2500 HD Regular Cab — Year-Specific Fitment Context
The 2000 model year is the final year of the Chevrolet 2500 HD Regular Cab's 8x165.1 bolt pattern run (since 1999). Wheels from any 1999–2000 Chevrolet 2500 HD Regular Cab are cross-compatible with the 2000 model.
Chevrolet 2500 HD Regular Cab Bolt Pattern by Year
The table below shows how the 2500 HD Regular Cab's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x165.1 | 116.7 | 20-40 |
| ▸ 2000 | 8x165.1 | 116.7 | 20-40 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2000 Chevrolet 2500 HD Regular Cab
For your 2000 Chevrolet 2500 HD Regular Cab, the 8x165.1 bolt pattern is shared with 1999-2000 models. Critical fitment factors: the 116.7mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and hub damage. Offset must stay within 20-40mm; deviations risk rubbing or bearing stress. Always use 14x1.5 lug nuts with correct seat type (conical or ball) matching the wheel. Mismatched thread pitch or seat can cause wheel loss. Verify wheel load rating exceeds vehicle GVWR. Hub-centric rings are mandatory for non-OEM wheels to ensure proper centering.
Historical Fitment Data Reference
In our dataset, Chevrolet 2500 HD Regular Cab appears from 1999 to 2000 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 60.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles to 140 ft-lbs (190 Nm) to account for settling.
- ✅ Avoid wheels with offset below 20mm; they may contact brake calipers or suspension on this model.
- ✅ Check for clearance with aftermarket wheels: the 2000 HD has large front brake rotors that can interfere with some designs.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Chevrolet 2500 HD Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2000 Chevrolet 2500 HD Regular Cab?
The 2000 Chevrolet 2500 HD Regular Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20-40mm.
What other years of Chevrolet 2500 HD Regular Cab have the same bolt pattern as the 2000?
The Chevrolet 2500 HD Regular Cab uses the 8x165.1 pattern from 1999 through 2000. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2000 Chevrolet 2500 HD Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 20-40mm, and a center bore of at least 116.7mm (using hub rings if larger).
What is the center bore of a 2000 Chevrolet 2500 HD Regular Cab?
The factory center bore (hub bore) for the 2000 Chevrolet 2500 HD Regular Cab is 116.7mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2000 Chevrolet 2500 HD Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 2500 HD Regular Cab, the PCD is 8x165.1.
Will wheels from another Chevrolet fit my 2000 2500 HD Regular Cab?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 116.7mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset