2011 Chevrolet Colorado Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Chevrolet Colorado Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2011 Colorado Regular Cab — Year-Specific Fitment Context
The 2011 Chevrolet Colorado Regular Cab is in year 8 of 9 using the 6x139.7 pattern (2004–2012). Wheels from any 2004–2012 Chevrolet Colorado Regular Cab are cross-compatible with the 2011 model.
Chevrolet Colorado Regular Cab Bolt Pattern by Year
The table below shows how the Colorado Regular Cab's wheel specifications have changed over the years. The 2011 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2011 Chevrolet Colorado Regular Cab
For your 2011 Chevrolet Colorado Regular Cab, the bolt pattern is 6x139.7mm with a critical center bore of 100.3mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 33mm; deviations beyond ±10mm may cause rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a cone seat, while aftermarket may require ball or flat seats. Mismatched lug nuts can lead to wheel detachment. Verify that aftermarket wheels are load-rated for your vehicle's weight.
Historical Fitment Data Reference
In our dataset, Chevrolet Colorado Regular Cab appears from 2004 to 2012 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 2013+ Colorado models as they have a different bolt pattern (6x120mm).
- ✅ Check for brake caliper clearance when using wheels with offset below 25mm or above 40mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Chevrolet Colorado Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2011 Chevrolet Colorado Regular Cab?
The 2011 Chevrolet Colorado Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of Chevrolet Colorado Regular Cab have the same bolt pattern as the 2011?
The Chevrolet Colorado Regular Cab uses the 6x139.7 pattern from 2004 through 2012. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2011 Chevrolet Colorado Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 33mm, and a center bore of at least 100.3mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2011 Chevrolet Colorado Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Chevrolet fit my 2011 Colorado Regular Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.3mm.
Do 2011 Chevrolet Colorado Regular Cabs use lug bolts or lug nuts?
The 2011 Colorado Regular Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset