2007 Chevrolet Colorado Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Chevrolet Colorado Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2007 Colorado Regular Cab — Year-Specific Fitment Context
The 2007 Chevrolet Colorado Regular Cab is in year 4 of 9 using the 6x139.7 pattern (2004–2012). Wheels from any 2004–2012 Chevrolet Colorado Regular Cab are cross-compatible with the 2007 model.
Chevrolet Colorado Regular Cab Bolt Pattern by Year
The table below shows how the Colorado Regular Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2007 Chevrolet Colorado Regular Cab
For your 2007 Chevrolet Colorado Regular Cab, the 6x139.7 bolt pattern is shared across 2004–2012 models, but critical dimensions differ. The center bore is 100.3mm; aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive: stock is 33mm. Using wheels with offset outside +/-10mm can cause rubbing or bearing stress. Always verify lug nut thread pitch (12x1.5) and seat type—factory uses cone seats. Using ball-seat or incorrect thread pitch lugs can lead to wheel loss. Safety first: confirm all specs before installation.
Historical Fitment Data Reference
In our dataset, Chevrolet Colorado Regular Cab appears from 2004 to 2012 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles to 140 Nm (103 lb-ft) to account for settling.
- ✅ Avoid wheels with offset below 23mm or above 43mm to prevent fender rubbing or brake caliper contact.
- ✅ If using aftermarket wheels, always install hub-centric rings (100.3mm ID to wheel bore OD) to eliminate vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Chevrolet Colorado Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 Chevrolet Colorado Regular Cab?
The 2007 Chevrolet Colorado Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of Chevrolet Colorado Regular Cab have the same bolt pattern as the 2007?
The Chevrolet Colorado Regular Cab uses the 6x139.7 pattern from 2004 through 2012. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the factory wheel offset for a 2007 Chevrolet Colorado Regular Cab?
The OEM offset for the 2007 Colorado Regular Cab is typically around 33mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2007 Chevrolet Colorado Regular Cab use?
The 2007 Chevrolet Colorado Regular Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Chevrolet fit my 2007 Colorado Regular Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.3mm.
How do I measure the bolt pattern on my 2007 Chevrolet?
The 2007 Colorado Regular Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset