2010 Chevrolet Colorado Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Chevrolet Colorado Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2010 Colorado Regular Cab — Year-Specific Fitment Context
The 2010 Chevrolet Colorado Regular Cab is in year 7 of 9 using the 6x139.7 pattern (2004–2012). Wheels from any 2004–2012 Chevrolet Colorado Regular Cab are cross-compatible with the 2010 model.
Chevrolet Colorado Regular Cab Bolt Pattern by Year
The table below shows how the Colorado Regular Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2010 Chevrolet Colorado Regular Cab
For your 2010 Chevrolet Colorado Regular Cab, the bolt pattern is 6x139.7mm with a critical center bore of 100.3mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 33mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper for most aftermarket wheels). Avoid ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles. Wheels from 2004-2012 Colorado models are cross-compatible, but verify offset and bore.
Historical Fitment Data Reference
In our dataset, Chevrolet Colorado Regular Cab appears from 2004 to 2012 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 100.3mm center bore to avoid vibrations.
- ✅ Check offset carefully: 33mm is optimal; offsets below 25mm may rub suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Chevrolet Colorado Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 Chevrolet Colorado Regular Cab?
The 2010 Chevrolet Colorado Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of Chevrolet Colorado Regular Cab have the same bolt pattern as the 2010?
The Chevrolet Colorado Regular Cab uses the 6x139.7 pattern from 2004 through 2012. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Will wheels from another Chevrolet fit my 2010 Colorado Regular Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.3mm.
Can I use spacers on my 2010 Chevrolet Colorado Regular Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 100.3mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How tight should I torque the lug nuts on a 2010 Chevrolet Colorado Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2010 Chevrolet Colorado Regular Cab use?
The 2010 Chevrolet Colorado Regular Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset