1995 Chevrolet Corvette Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Chevrolet Corvette, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 52 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
1995 Corvette — Year-Specific Fitment Context
The 1995 Chevrolet Corvette is in year 4 of 28 using the 5x120.65 pattern (1992–2019). Wheels from any 1992–2019 Chevrolet Corvette are cross-compatible with the 1995 model. Across its full production run (1992–2024), the Corvette has also used: 5x120.
Chevrolet Corvette Bolt Pattern by Year
The table below shows how the Corvette's wheel specifications have changed over the years. The 1995 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 52 |
| 1993 | 5x120.65 | 70.3 | 52 |
| 1994 | 5x120.65 | 70.3 | 52 |
| ▸ 1995 | 5x120.65 | 70.3 | 52 |
| 1996 | 5x120.65 | 70.3 | 52 |
| 1997 | 5x120.65 | 70.3 | 52 |
| 1998 | 5x120.65 | 70.3 | 56 |
| 1999 | 5x120.65 | 70.3 | 56 |
| 2000 | 5x120.65 | 70.3 | 56 |
| 2001 | 5x120.65 | 70.3 | 56 |
| 2002 | 5x120.65 | 70.3 | 56 |
| 2003 | 5x120.65 | 70.3 | 56 |
| 2004 | 5x120.65 | 70.3 | 56 |
| 2005 | 5x120.65 | 70.3 | 78 |
| 2006 | 5x120.65 | 70.3 | 78 |
| 2007 | 5x120.65 | 70.3 | 78 |
| 2008 | 5x120.65 | 70.3 | 78 |
| 2009 | 5x120.65 | 70.3 | 78 |
| 2010 | 5x120.65 | 70.3 | 78 |
| 2011 | 5x120.65 | 70.3 | 78 |
| 2012 | 5x120.65 | 70.3 | 78 |
| 2013 | 5x120.65 | 70.3 | 78 |
| 2014 | 5x120.65 | 70.3 | 78 |
| 2015 | 5x120.65 | 70.3 | 77 |
| 2016 | 5x120.65 | 70.3 | 77 |
| 2017 | 5x120.65 | 70.3 | 77 |
| 2018 | 5x120.65 | 70.3 | 77 |
| 2019 | 5x120.65 | 70.3 | 50 |
| 2020 | 5x120 | 66.9 | 50 |
| 2021 | 5x120 | 66.9 | 50 |
| 2022 | 5x120 | 66.9 | 50 |
| 2023 | 5x120 | 66.9 | 50 |
| 2024 | 5x120 | 66.9 | 50 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 1995 Chevrolet Corvette
For your 1995 Chevrolet Corvette, the 5x120.65 bolt pattern and 70.3mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 52mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—tapered cone seats are standard. Avoid ball-seat or shank-style nuts. Re-torque after 50-100 miles. Wheels from 1992-2019 Corvettes are direct fit, but verify offset for C5+ models.
Historical Fitment Data Reference
In our dataset, Chevrolet Corvette appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 28.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, always install hub-centric rings (70.3mm ID to wheel's bore) to prevent vibration and hub damage.
- ✅ Avoid wheels with offset below 45mm or above 58mm to prevent fender rubbing or brake caliper contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Chevrolet Corvette — Frequently Asked Questions
What is the bolt pattern for a 1995 Chevrolet Corvette?
The 1995 Chevrolet Corvette uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 52mm.
What other years of Chevrolet Corvette have the same bolt pattern as the 1995?
The Chevrolet Corvette uses the 5x120.65 pattern from 1992 through 2019. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
Why is matching the 70.3mm center bore important for the 1995 Corvette?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 52mm offset mean for the 1995 Corvette?
An offset of 52mm means the wheel's mounting surface is 52mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
Will wheels from another Chevrolet fit my 1995 Corvette?
Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
What is the center bore of a 1995 Chevrolet Corvette?
The factory center bore (hub bore) for the 1995 Chevrolet Corvette is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset