2000 Chevrolet Corvette Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Chevrolet Corvette, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 56 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 Corvette — Year-Specific Fitment Context
The 2000 Chevrolet Corvette is in year 9 of 28 using the 5x120.65 pattern (1992–2019). Wheels from any 1992–2019 Chevrolet Corvette are cross-compatible with the 2000 model. Across its full production run (1992–2024), the Corvette has also used: 5x120.
Chevrolet Corvette Bolt Pattern by Year
The table below shows how the Corvette's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 52 |
| 1993 | 5x120.65 | 70.3 | 52 |
| 1994 | 5x120.65 | 70.3 | 52 |
| 1995 | 5x120.65 | 70.3 | 52 |
| 1996 | 5x120.65 | 70.3 | 52 |
| 1997 | 5x120.65 | 70.3 | 52 |
| 1998 | 5x120.65 | 70.3 | 56 |
| 1999 | 5x120.65 | 70.3 | 56 |
| ▸ 2000 | 5x120.65 | 70.3 | 56 |
| 2001 | 5x120.65 | 70.3 | 56 |
| 2002 | 5x120.65 | 70.3 | 56 |
| 2003 | 5x120.65 | 70.3 | 56 |
| 2004 | 5x120.65 | 70.3 | 56 |
| 2005 | 5x120.65 | 70.3 | 78 |
| 2006 | 5x120.65 | 70.3 | 78 |
| 2007 | 5x120.65 | 70.3 | 78 |
| 2008 | 5x120.65 | 70.3 | 78 |
| 2009 | 5x120.65 | 70.3 | 78 |
| 2010 | 5x120.65 | 70.3 | 78 |
| 2011 | 5x120.65 | 70.3 | 78 |
| 2012 | 5x120.65 | 70.3 | 78 |
| 2013 | 5x120.65 | 70.3 | 78 |
| 2014 | 5x120.65 | 70.3 | 78 |
| 2015 | 5x120.65 | 70.3 | 77 |
| 2016 | 5x120.65 | 70.3 | 77 |
| 2017 | 5x120.65 | 70.3 | 77 |
| 2018 | 5x120.65 | 70.3 | 77 |
| 2019 | 5x120.65 | 70.3 | 50 |
| 2020 | 5x120 | 66.9 | 50 |
| 2021 | 5x120 | 66.9 | 50 |
| 2022 | 5x120 | 66.9 | 50 |
| 2023 | 5x120 | 66.9 | 50 |
| 2024 | 5x120 | 66.9 | 50 |
Fitment Notes
The 2000 Chevrolet Corvette has a bolt pattern of 5x120.65.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.75" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.75".
This means it is a 5 lug pattern with a circle diameter of 120.65mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Chevrolet Corvette appears from 1992 to 2024 (33 model years).
Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 28.0 mm
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
2000 Chevrolet Corvette — Frequently Asked Questions
What is the bolt pattern for a 2000 Chevrolet Corvette?
The 2000 Chevrolet Corvette uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 56mm.
What other years of Chevrolet Corvette have the same bolt pattern as the 2000?
The Chevrolet Corvette uses the 5x120.65 pattern from 1992 through 2019. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What does 56mm offset mean for the 2000 Corvette?
An offset of 56mm means the wheel's mounting surface is 56mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
What is the factory wheel offset for a 2000 Chevrolet Corvette?
The OEM offset for the 2000 Corvette is typically around 56mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2000 Chevrolet Corvette use?
The 2000 Chevrolet Corvette uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2000 Chevrolet Corvette?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Corvette, the PCD is 5x120.65.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Chevrolet Corvette has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2024 (33 model years).
- Observed bolt-pattern variants: 2 (5x120, 5x120.65).
- Observed total offset span across years: 28.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 3.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Chevrolet Corvette, please report it via our About page contact so we can verify and update this record.