2012 Chevrolet Corvette Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Chevrolet Corvette, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 78 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2012 Corvette — Year-Specific Fitment Context
The 2012 Chevrolet Corvette is in year 21 of 28 using the 5x120.65 pattern (1992–2019). Wheels from any 1992–2019 Chevrolet Corvette are cross-compatible with the 2012 model. Across its full production run (1992–2024), the Corvette has also used: 5x120.
Chevrolet Corvette Bolt Pattern by Year
The table below shows how the Corvette's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 52 |
| 1993 | 5x120.65 | 70.3 | 52 |
| 1994 | 5x120.65 | 70.3 | 52 |
| 1995 | 5x120.65 | 70.3 | 52 |
| 1996 | 5x120.65 | 70.3 | 52 |
| 1997 | 5x120.65 | 70.3 | 52 |
| 1998 | 5x120.65 | 70.3 | 56 |
| 1999 | 5x120.65 | 70.3 | 56 |
| 2000 | 5x120.65 | 70.3 | 56 |
| 2001 | 5x120.65 | 70.3 | 56 |
| 2002 | 5x120.65 | 70.3 | 56 |
| 2003 | 5x120.65 | 70.3 | 56 |
| 2004 | 5x120.65 | 70.3 | 56 |
| 2005 | 5x120.65 | 70.3 | 78 |
| 2006 | 5x120.65 | 70.3 | 78 |
| 2007 | 5x120.65 | 70.3 | 78 |
| 2008 | 5x120.65 | 70.3 | 78 |
| 2009 | 5x120.65 | 70.3 | 78 |
| 2010 | 5x120.65 | 70.3 | 78 |
| 2011 | 5x120.65 | 70.3 | 78 |
| ▸ 2012 | 5x120.65 | 70.3 | 78 |
| 2013 | 5x120.65 | 70.3 | 78 |
| 2014 | 5x120.65 | 70.3 | 78 |
| 2015 | 5x120.65 | 70.3 | 77 |
| 2016 | 5x120.65 | 70.3 | 77 |
| 2017 | 5x120.65 | 70.3 | 77 |
| 2018 | 5x120.65 | 70.3 | 77 |
| 2019 | 5x120.65 | 70.3 | 50 |
| 2020 | 5x120 | 66.9 | 50 |
| 2021 | 5x120 | 66.9 | 50 |
| 2022 | 5x120 | 66.9 | 50 |
| 2023 | 5x120 | 66.9 | 50 |
| 2024 | 5x120 | 66.9 | 50 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2012 Chevrolet Corvette
When selecting wheels for your 2012 Chevrolet Corvette, the 70.3mm center bore is critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is sensitive; 78mm is typical, but deviations can cause rubbing or clearance issues. Always verify offset with your specific model (base, Z06, etc.). Lug nuts must be 12x1.50 with a conical (60-degree) seat. Using incorrect thread pitch or seat type can lead to wheel loss. For safety, re-torque after 50-100 miles and avoid mixing wheel types across Corvette generations without confirming specs.
Historical Fitment Data Reference
In our dataset, Chevrolet Corvette appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 28.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, always install hub-centric rings (70.3mm ID to wheel bore OD).
- ✅ Avoid using wheels from C5 or C6 Corvettes with different offset (e.g., 56mm) without checking clearance.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Chevrolet Corvette — Frequently Asked Questions
What is the bolt pattern for a 2012 Chevrolet Corvette?
The 2012 Chevrolet Corvette uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 78mm.
What other years of Chevrolet Corvette have the same bolt pattern as the 2012?
The Chevrolet Corvette uses the 5x120.65 pattern from 1992 through 2019. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2012 Chevrolet?
The 2012 Corvette uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2012 Chevrolet Corvette?
The factory center bore (hub bore) for the 2012 Chevrolet Corvette is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2012 Chevrolet Corvettes use lug bolts or lug nuts?
The 2012 Corvette requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2012 Chevrolet Corvette use?
The 2012 Chevrolet Corvette uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset