2008 Chevrolet Express 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Chevrolet Express 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 28 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2008 Express 2500 Cargo — Year-Specific Fitment Context
The 2008 Chevrolet Express 2500 Cargo is in year 10 of 12 using the 8x165.1 pattern (1999–2010). Wheels from any 1999–2010 Chevrolet Express 2500 Cargo are cross-compatible with the 2008 model. Across its full production run (1999–2024), the Express 2500 Cargo has also used: 8x180.
Chevrolet Express 2500 Cargo Bolt Pattern by Year
The table below shows how the Express 2500 Cargo's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x165.1 | 116.7 | 28 |
| 2000 | 8x165.1 | 116.7 | 28 |
| 2001 | 8x165.1 | 116.7 | 28 |
| 2002 | 8x165.1 | 116.7 | 28 |
| 2003 | 8x165.1 | 116.7 | 28 |
| 2004 | 8x165.1 | 116.7 | 28 |
| 2005 | 8x165.1 | 116.7 | 28 |
| 2006 | 8x165.1 | 116.7 | 28 |
| 2007 | 8x165.1 | 116.7 | 28 |
| ▸ 2008 | 8x165.1 | 116.7 | 28 |
| 2009 | 8x165.1 | 116.7 | 28 |
| 2010 | 8x165.1 | 116.7 | 28 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2020 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2023 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2008 Chevrolet Express 2500 Cargo
For your 2008 Chevrolet Express 2500 Cargo, the bolt pattern is 8x165.1mm with a center bore of 116.7mm. When selecting aftermarket wheels, ensure they have a center bore of at least 116.7mm; if larger, use hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 28mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree) to guarantee safe clamping. Avoid ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles. Wheels from 1999-2010 Express 2500 Cargo are direct fit.
Historical Fitment Data Reference
In our dataset, Chevrolet Express 2500 Cargo appears from 1999 to 2024 (26 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 16.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore smaller than 116.7mm; they will not fit over the hub.
- ✅ Double-check that aftermarket wheels have sufficient brake caliper clearance, as some designs may interfere.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Chevrolet Express 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2008 Chevrolet Express 2500 Cargo?
The 2008 Chevrolet Express 2500 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 28mm.
What other years of Chevrolet Express 2500 Cargo have the same bolt pattern as the 2008?
The Chevrolet Express 2500 Cargo uses the 8x165.1 pattern from 1999 through 2010. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Will wheels from another Chevrolet fit my 2008 Express 2500 Cargo?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 116.7mm.
What is the PCD for a 2008 Chevrolet Express 2500 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Express 2500 Cargo, the PCD is 8x165.1.
What is the factory wheel offset for a 2008 Chevrolet Express 2500 Cargo?
The OEM offset for the 2008 Express 2500 Cargo is typically around 28mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2008 Chevrolet Express 2500 Cargo?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset