1997 Chevrolet G-Series 3500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Chevrolet G-Series 3500, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1997 G-Series 3500 — Year-Specific Fitment Context
The 1997 model year marks the beginning of the Chevrolet G-Series 3500's 8x165.1 bolt pattern era, which continued through 1998 (2 consecutive years). Wheels from any 1997–1998 Chevrolet G-Series 3500 are cross-compatible with the 1997 model.
Chevrolet G-Series 3500 Bolt Pattern by Year
The table below shows how the G-Series 3500's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1997 | 8x165.1 | 116.7 | 20 |
| 1998 | 8x165.1 | 116.7 | 20 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1997 Chevrolet G-Series 3500
For the 1997 Chevrolet G-Series 3500, the 8x165.1 bolt pattern is shared only with 1997-1998 models. The center bore is 116.7mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is critical: the factory offset is 20mm. Deviating more than ±10mm may cause rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical 60-degree). Using incorrect seat or thread can lead to wheel loosening. Verify wheel load rating exceeds vehicle GVWR.
Historical Fitment Data Reference
In our dataset, Chevrolet G-Series 3500 appears from 1997 to 1998 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without verifying center bore; hub-centric rings are mandatory for safe fitment.
- ✅ Check for clearance with brake calipers and suspension components when changing offset or wheel width.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Chevrolet G-Series 3500 — Frequently Asked Questions
What is the bolt pattern for a 1997 Chevrolet G-Series 3500?
The 1997 Chevrolet G-Series 3500 uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20mm.
What other years of Chevrolet G-Series 3500 have the same bolt pattern as the 1997?
The Chevrolet G-Series 3500 uses the 8x165.1 pattern from 1997 through 1998. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What lug nut size does the 1997 Chevrolet G-Series 3500 use?
The 1997 Chevrolet G-Series 3500 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 1997 Chevrolet G-Series 3500?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 20mm, and a center bore of at least 116.7mm (using hub rings if larger).
Why is matching the 116.7mm center bore important for the 1997 G-Series 3500?
The 116.7mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 1997 Chevrolet G-Series 3500?
The factory center bore (hub bore) for the 1997 Chevrolet G-Series 3500 is 116.7mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset