2011 Chevrolet HHR Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Chevrolet HHR, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 HHR — Year-Specific Fitment Context
The 2011 model year is the final year of the Chevrolet HHR's 5x110 bolt pattern run (since 2006). Wheels from any 2006–2011 Chevrolet HHR are cross-compatible with the 2011 model.
Chevrolet HHR Bolt Pattern by Year
The table below shows how the HHR's wheel specifications have changed over the years. The 2011 model year is highlighted.
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
Expert Buying Guide for 2011 Chevrolet HHR
For your 2011 Chevrolet HHR, the 5x110 bolt pattern and 65.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree taper). Ball-seat or flat-seat lug nuts are unsafe and can lead to wheel loss. Verify that aftermarket wheels are hub-centric or use rings, and check brake caliper clearance for larger wheels.
Historical Fitment Data Reference
In our dataset, Chevrolet HHR appears from 2006 to 2011 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50 miles of driving.
- ✅ Avoid using wheels from other GM models (e.g., 5x115) without adapters; they are not compatible.
- ✅ If installing aftermarket wheels, ensure the hub-centric rings are made of metal (not plastic) for durability.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Chevrolet HHR — Frequently Asked Questions
What is the bolt pattern for a 2011 Chevrolet HHR?
The 2011 Chevrolet HHR uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 40mm.
What other years of Chevrolet HHR have the same bolt pattern as the 2011?
The Chevrolet HHR uses the 5x110 pattern from 2006 through 2011. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Do 2011 Chevrolet HHRs use lug bolts or lug nuts?
The 2011 HHR requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 40mm offset mean for the 2011 HHR?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
What is the PCD for a 2011 Chevrolet HHR?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 HHR, the PCD is 5x110.
What is the center bore of a 2011 Chevrolet HHR?
The factory center bore (hub bore) for the 2011 Chevrolet HHR is 65.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset