2010 Chevrolet HHR Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Chevrolet HHR, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 HHR — Year-Specific Fitment Context
The 2010 Chevrolet HHR is in year 5 of 6 using the 5x110 pattern (2006–2011). Wheels from any 2006–2011 Chevrolet HHR are cross-compatible with the 2010 model.
Chevrolet HHR Bolt Pattern by Year
The table below shows how the HHR's wheel specifications have changed over the years. The 2010 model year is highlighted.
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
Expert Buying Guide for 2010 Chevrolet HHR
The 2010 Chevrolet HHR uses a 5x110 bolt pattern with a 65.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The recommended offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree). Never mix seat types—using the wrong lug nut can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or install rings to center the wheel on the hub.
Historical Fitment Data Reference
In our dataset, Chevrolet HHR appears from 2006 to 2011 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using wheels with a center bore larger than 65.1mm without hub-centric rings; otherwise, the wheel may not be centered, causing vibrations.
- ✅ Check for brake caliper clearance when using aftermarket wheels, as some designs may interfere with the caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Chevrolet HHR — Frequently Asked Questions
What is the bolt pattern for a 2010 Chevrolet HHR?
The 2010 Chevrolet HHR uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 40mm.
What other years of Chevrolet HHR have the same bolt pattern as the 2010?
The Chevrolet HHR uses the 5x110 pattern from 2006 through 2011. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the PCD for a 2010 Chevrolet HHR?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 HHR, the PCD is 5x110.
What is the factory wheel offset for a 2010 Chevrolet HHR?
The OEM offset for the 2010 HHR is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2010 Chevrolet HHRs use lug bolts or lug nuts?
The 2010 HHR requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2010 Chevrolet HHR?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset