2009 Chevrolet Malibu Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Chevrolet Malibu, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2009 Malibu — Year-Specific Fitment Context
The 2009 Chevrolet Malibu is in year 4 of 5 using the 5x110 pattern (2006–2010). Wheels from any 2006–2010 Chevrolet Malibu are cross-compatible with the 2009 model. Across its full production run (1997–2024), the Malibu has also used: 5x115, 5x120.
Chevrolet Malibu Bolt Pattern by Year
The table below shows how the Malibu's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x115 | 70.3 | 42 |
| 1998 | 5x115 | 70.3 | 42 |
| 1999 | 5x115 | 70.3 | 42 |
| 2000 | 5x115 | 70.3 | 42 |
| 2001 | 5x115 | 70.3 | 42 |
| 2002 | 5x115 | 70.3 | 42 |
| 2003 | 5x115 | 70.3 | 42 |
| 2004 | 5x115 | 70.3 | 42 |
| 2005 | 5x115 | 70.3 | 42 |
| 2006 | 5x110 | 65.1 | 40 |
| 2007 | 5x110 | 65.1 | 40 |
| 2008 | 5x110 | 65.1 | 40 |
| ▸ 2009 | 5x110 | 65.1 | 40 |
| 2010 | 5x110 | 65.1 | 40 |
| 2011 | 5x120 | 67.1 | 40 |
| 2012 | 5x120 | 67.1 | 40 |
| 2013 | 5x120 | 67.1 | 40 |
| 2014 | 5x120 | 67.1 | 40 |
| 2015 | 5x120 | 67.1 | 40 |
| 2016 | 5x120 | 67.1 | 40 |
| 2017 | 5x120 | 67.1 | 40 |
| 2018 | 5x120 | 67.1 | 40 |
| 2019 | 5x115 | 70.3 | 40 |
| 2020 | 5x115 | 70.3 | 40 |
| 2021 | 5x115 | 70.3 | 40 |
| 2022 | 5x115 | 70.3 | 40 |
| 2023 | 5x115 | 70.3 | 40 |
| 2024 | 5x115 | 70.3 | 40 |
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
Expert Buying Guide for 2009 Chevrolet Malibu
For your 2009 Chevrolet Malibu, the 5x110 bolt pattern and 65.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive: stick to 35-45mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree). Using incorrect lug nuts can cause wheel separation. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully for brake caliper clearance.
Historical Fitment Data Reference
In our dataset, Chevrolet Malibu appears from 1997 to 2024 (28 model years). Across model years, this model appears with 3 bolt patterns (5x110, 5x115, 5x120).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 2.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 65.1mm center bore.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Chevrolet Malibu — Frequently Asked Questions
What is the bolt pattern for a 2009 Chevrolet Malibu?
The 2009 Chevrolet Malibu uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 40mm.
What other years of Chevrolet Malibu have the same bolt pattern as the 2009?
The Chevrolet Malibu uses the 5x110 pattern from 2006 through 2010. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What is the center bore of a 2009 Chevrolet Malibu?
The factory center bore (hub bore) for the 2009 Chevrolet Malibu is 65.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Chevrolet fit my 2009 Malibu?
Only if they share the exact same 5x110 bolt pattern, a compatible offset, and a center bore equal to or larger than 65.1mm.
Do 2009 Chevrolet Malibus use lug bolts or lug nuts?
The 2009 Malibu requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2009 Chevrolet Malibu?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2009 Malibu, the PCD is 5x110.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset