2015 Chrysler 200 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Chrysler 200, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2015 200 — Year-Specific Fitment Context
The 2015 model year is the final year of the Chrysler 200's 5x114.3 bolt pattern run (since 2011). Wheels from any 2011–2015 Chrysler 200 are cross-compatible with the 2015 model. Important: starting in 2016, Chrysler switched to 5x110 — those wheels will not fit the 2015 model. Across its full production run (2011–2017), the 200 has also used: 5x110.
Chrysler 200 Bolt Pattern by Year
The table below shows how the 200's wheel specifications have changed over the years. The 2015 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2015 Chrysler 200
For the 2015 Chrysler 200, the bolt pattern is 5x114.3, but note that 2016+ models use 5x110—so ensure compatibility. The center bore is 67.1mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is critical: stock is 42mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree taper). Flat-seat or ball-seat nuts can loosen or damage the wheel. Re-torque after 50-100 miles. Avoid using wheels from 2016+ models.
Historical Fitment Data Reference
In our dataset, Chrysler 200 appears from 2011 to 2017 (7 model years). Across model years, this model appears with 2 bolt patterns (5x110, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles of driving.
- ✅ Never use wheels from 2016+ Chrysler 200 (5x110) on this model.
- ✅ If using aftermarket wheels, verify hub bore and use hub-centric rings if needed.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Chrysler 200 — Frequently Asked Questions
What is the bolt pattern for a 2015 Chrysler 200?
The 2015 Chrysler 200 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42mm.
What other years of Chrysler 200 have the same bolt pattern as the 2015?
The Chrysler 200 uses the 5x114.3 pattern from 2011 through 2015. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
Will 2016 Chrysler 200 wheels fit a 2015 model?
No. The 2016 Chrysler 200 switched to a 5x110 bolt pattern, which is not compatible with the 2015 model's 5x114.3. Using mismatched patterns is unsafe.
What lug nut size does the 2015 Chrysler 200 use?
The 2015 Chrysler 200 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2015 Chrysler 200?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2015 200, the PCD is 5x114.3.
Do 2015 Chrysler 200s use lug bolts or lug nuts?
The 2015 200 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset