2014 Chrysler 200 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Chrysler 200, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 200 — Year-Specific Fitment Context
The 2014 Chrysler 200 is in year 4 of 5 using the 5x114.3 pattern (2011–2015). Wheels from any 2011–2015 Chrysler 200 are cross-compatible with the 2014 model. Across its full production run (2011–2017), the 200 has also used: 5x110.
Chrysler 200 Bolt Pattern by Year
The table below shows how the 200's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Chrysler 200
For the 2014 Chrysler 200, the bolt pattern is 5x114.3mm with a center bore of 67.1mm. When selecting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 42mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree) to avoid wheel loosening or damage. Cross-compatible wheels from 2011–2015 Chrysler 200 models fit directly, but verify offset and bore. Safety first: improper fitment compromises handling and can lead to accidents.
Historical Fitment Data Reference
In our dataset, Chrysler 200 appears from 2011 to 2017 (7 model years). Across model years, this model appears with 2 bolt patterns (5x110, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings; vibration and stress on studs may occur.
- ✅ Check brake caliper clearance when using wheels with offset below 37mm; aftermarket brakes may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Chrysler 200 — Frequently Asked Questions
What is the bolt pattern for a 2014 Chrysler 200?
The 2014 Chrysler 200 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42mm.
What other years of Chrysler 200 have the same bolt pattern as the 2014?
The Chrysler 200 uses the 5x114.3 pattern from 2011 through 2015. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2014 Chrysler 200?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2014 Chrysler 200?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2014 Chrysler 200?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 200, the PCD is 5x114.3.
Will wheels from another Chrysler fit my 2014 200?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset