2007 Chrysler Aspen Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Chrysler Aspen, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 9/16" |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 30 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2007 Aspen — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Chrysler Aspen's 5x139.7 bolt pattern era, which continued through 2009 (3 consecutive years). Wheels from any 2007–2009 Chrysler Aspen are cross-compatible with the 2007 model.
Chrysler Aspen Bolt Pattern by Year
The table below shows how the Aspen's wheel specifications have changed over the years. The 2007 model year is highlighted.
Fitment Notes
The 2007 Chrysler Aspen has a bolt pattern of 5x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5.5".
This means it is a 5 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Chrysler Aspen appears from 2007 to 2009 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
2007 Chrysler Aspen — Frequently Asked Questions
What is the bolt pattern for a 2007 Chrysler Aspen?
The 2007 Chrysler Aspen uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 30mm.
What other years of Chrysler Aspen have the same bolt pattern as the 2007?
The Chrysler Aspen uses the 5x139.7 pattern from 2007 through 2009. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Why is matching the 77.8mm center bore important for the 2007 Aspen?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2007 Chrysler Aspen?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 30mm, and a center bore of at least 77.8mm (using hub rings if larger).
What is the center bore of a 2007 Chrysler Aspen?
The factory center bore (hub bore) for the 2007 Chrysler Aspen is 77.8mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2007 Chrysler Aspens use lug bolts or lug nuts?
The 2007 Aspen requires N 9/16" hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Chrysler Aspen is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2007-2009 (3 model years).
- Observed bolt-pattern variants: 1 (5x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Chrysler Aspen, please report it via our About page contact so we can verify and update this record.