1992 Chrysler New Yorker Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Chrysler New Yorker, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 New Yorker — Year-Specific Fitment Context
The 1992 is the only model year of the Chrysler New Yorker in our database using the 5x100 bolt pattern. Important: starting in 1993, Chrysler switched to 5x114.3 — those wheels will not fit the 1992 model. Across its full production run (1992–1996), the New Yorker has also used: 5x114.3.
Chrysler New Yorker Bolt Pattern by Year
The table below shows how the New Yorker's wheel specifications have changed over the years. The 1992 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1992 Chrysler New Yorker
For your 1992 Chrysler New Yorker, the bolt pattern is 5x100, unique to this model year. The center bore is 57.1mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. Offset must be between 35-45mm; deviations risk rubbing or poor handling. Use M12x1.5 lug nuts with the correct seat (cone or ball) to avoid wheel loosening. Always torque to spec and re-torque after 50 miles. Note: 1993+ New Yorkers use 5x114.3—those wheels will not fit.
Historical Fitment Data Reference
In our dataset, Chrysler New Yorker appears from 1992 to 1996 (5 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Verify wheel bore is 57.1mm or use hub-centric rings; hub-centric fitment is critical for safety.
- ✅ Avoid wheels from 1993+ New Yorkers (5x114.3) as they will not bolt on; always confirm bolt pattern.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Chrysler New Yorker — Frequently Asked Questions
What is the bolt pattern for a 1992 Chrysler New Yorker?
The 1992 Chrysler New Yorker uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 35-45mmmm.
Will 1993 Chrysler New Yorker wheels fit a 1992 model?
No. The 1993 Chrysler New Yorker switched to a 5x114.3 bolt pattern, which is not compatible with the 1992 model's 5x100. Using mismatched patterns is unsafe.
Will wheels from another Chrysler fit my 1992 New Yorker?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
How do I measure the bolt pattern on my 1992 Chrysler?
The 1992 New Yorker uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 1992 Chrysler New Yorker?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
What does 35-45mmmm offset mean for the 1992 New Yorker?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chrysler.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset