2008 Dodge Dakota Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Dodge Dakota Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25.4 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2008 Dakota Extended Cab — Year-Specific Fitment Context
The 2008 model year marks the beginning of the Dodge Dakota Extended Cab's 5x139.7 bolt pattern era, which continued through 2010 (3 consecutive years). Wheels from any 2008–2010 Dodge Dakota Extended Cab are cross-compatible with the 2008 model.
Dodge Dakota Extended Cab Bolt Pattern by Year
The table below shows how the Dakota Extended Cab's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2008 Dodge Dakota Extended Cab
For the 2008 Dodge Dakota Extended Cab, the 5x139.7 bolt pattern is shared with 2008-2010 models, ensuring cross-compatibility. The 77.8mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset sensitivity is high: the factory offset is 25.4mm. Deviating more than ±10mm may cause rubbing or clearance issues. Always use the correct lug nuts: 9/16 thread with a cone seat (60-degree taper). Never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Dodge Dakota Extended Cab appears from 2008 to 2010 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100-110 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 77.8mm; outer diameter must match wheel bore.
- ✅ Check wheel offset: staying within 15-35mm offset is safe; lower offset (more negative) may require fender rolling or trimming.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Dodge Dakota Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2008 Dodge Dakota Extended Cab?
The 2008 Dodge Dakota Extended Cab uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25.4mm.
What other years of Dodge Dakota Extended Cab have the same bolt pattern as the 2008?
The Dodge Dakota Extended Cab uses the 5x139.7 pattern from 2008 through 2010. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Do 2008 Dodge Dakota Extended Cabs use lug bolts or lug nuts?
The 2008 Dakota Extended Cab requires 9/16 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2008 Dodge Dakota Extended Cab?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 77.8mm center bore. Also verify that you have enough thread engagement for your 9/16 hardware.
What is the factory wheel offset for a 2008 Dodge Dakota Extended Cab?
The OEM offset for the 2008 Dakota Extended Cab is typically around 25.4mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Dodge fit my 2008 Dakota Extended Cab?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset