2010 Dodge Grand Caravan Passenger Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2010 Dodge Grand Caravan Passenger is 5x127 (5x5"). It has a center bore of 71.6 mm, an offset range of 40, and utilizes N 12x1.50 (Cone seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2010 Dodge Grand Caravan Passenger Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Center Bore (Hub Bore) | 71.6 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | N 12x1.50 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2010 Grand Caravan Passenger — Year-Specific Fitment Context
The 2010 Dodge Grand Caravan Passenger is in year 2 of 12 using the 5x127 pattern (2009–2020). Wheels from any 2009–2020 Dodge Grand Caravan Passenger are cross-compatible with the 2010 model. Across its full production run (1992–2020), the Grand Caravan Passenger has also used: 5x114.3.
Dodge Grand Caravan Passenger Bolt Pattern by Year
The table below shows how the Grand Caravan Passenger's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 71.5 | 40 |
| 1993 | 5x114.3 | 71.5 | 40 |
| 1994 | 5x114.3 | 71.5 | 40 |
| 1995 | 5x114.3 | 71.6 | 40 |
| 1996 | 5x114.3 | 71.6 | 40 |
| 1997 | 5x114.3 | 71.6 | 40 |
| 1998 | 5x114.3 | 71.6 | 40 |
| 1999 | 5x114.3 | 71.6 | 40 |
| 2000 | 5x114.3 | 71.6 | 40 |
| 2001 | 5x114.3 | 71.6 | 40 |
| 2002 | 5x114.3 | 71.6 | 40 |
| 2003 | 5x114.3 | 71.6 | 40 |
| 2004 | 5x114.3 | 71.6 | 40 |
| 2005 | 5x114.3 | 71.6 | 40 |
| 2006 | 5x114.3 | 71.6 | 40 |
| 2007 | 5x114.3 | 71.6 | 40 |
| 2008 | 5x114.3 | 71.6 | 40 |
| 2009 | 5x127 | 71.6 | 40 |
| ▸ 2010 | 5x127 | 71.6 | 40 |
| 2011 | 5x127 | 71.6 | 40 |
| 2012 | 5x127 | 71.6 | 40 |
| 2013 | 5x127 | 71.6 | 40 |
| 2014 | 5x127 | 71.6 | 40 |
| 2015 | 5x127 | 71.6 | 40 |
| 2016 | 5x127 | 71.6 | 40 |
| 2017 | 5x127 | 71.6 | 40 |
| 2018 | 5x127 | 71.6 | 40 |
| 2019 | 5x127 | 71.6 | 40 |
| 2020 | 5x127 | 71.5 | 40 |
2010 Dodge Grand Caravan Passenger Wheel Interchange & Donor Fitment Guide (5x127)
The 5x127 bolt pattern is shared by 281 vehicles in our database (moderately common). For safe wheel swaps on the 2010 Dodge Grand Caravan Passenger, donor rims must match the 5x127 PCD and have a center bore of at least 71.6 mm:
DIRECT HUB MATCH Same 5x127 Pattern & Exact 71.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2020 Chrysler Voyager | 71.5 mm (Exact) | 40-50mm | M14x1.5 (Cone) |
| 2024 Dodge Charger | 71.6 mm (Exact) | 18-25 | 14x1.5 (Cone) |
| 2012 Dodge Durango | 71.6 mm (Exact) | 53 | N 1/2" (20 UNF) (Cone) |
| 2009 Dodge Grand Caravan Cargo | 71.6 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2009 Dodge Journey | 71.6 mm (Exact) | 42 | N 1/2" (20 UNF) (Cone) |
| 2006 Jeep Commander | 71.6 mm (Exact) | 50 | N 1/2" (Cone) |
HUB RING FITMENT Same 5x127 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1992 GMC Safari Cargo | 78.1 mm | 78.1mm → 71.6mm |
0 |
| 1992 GMC Safari Passenger | 78.1 mm | 78.1mm → 71.6mm |
0 |
| 1996 GMC Savana 1500 Cargo | 78.1 mm | 78.1mm → 71.6mm |
20-30 |
| 1996 GMC Savana 1500 Passenger | 78.1 mm | 78.1mm → 71.6mm |
20-30 |
| 1992 Land Rover Range Rover | 78.1 mm | 78.1mm → 71.6mm |
50 |
| 1992 Oldsmobile Custom Cruiser | 78.3 mm | 78.3mm → 71.6mm |
12 |
Expert Buying Guide for 2010 Dodge Grand Caravan Passenger
For your 2010 Dodge Grand Caravan Passenger, the bolt pattern is 5x127 with a center bore of 71.6mm. When selecting aftermarket wheels, ensure they have a center bore of at least 71.6mm; if larger, use hub-centric rings to prevent vibrations. The factory offset is 40mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone or ball seat) matching your wheels. Improper lug nuts can cause wheel detachment. Wheels from 2009–2020 Grand Caravan Passenger models are direct fit.
Historical Fitment Data Reference
In our dataset, Dodge Grand Caravan Passenger appears from 1992 to 2020 (29 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore smaller than 71.6mm; they will not fit over the hub.
- ✅ Check brake caliper clearance when using wheels with lower offset (e.g., 30mm) as they may contact the caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2010 Dodge Grand Caravan Passenger — Frequently Asked Questions
What is the bolt pattern for a 2010 Dodge Grand Caravan Passenger?
The 2010 Dodge Grand Caravan Passenger uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Dodge Grand Caravan Passenger have the same bolt pattern as the 2010?
The Dodge Grand Caravan Passenger uses the 5x127 pattern from 2009 through 2020. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2010 Dodge Grand Caravan Passenger?
Absolutely. Just ensure the aftermarket wheels have a 5x127 bolt pattern, an offset near 40mm, and a center bore of at least 71.6mm (using hub rings if larger).
What is the center bore of a 2010 Dodge Grand Caravan Passenger?
The factory center bore (hub bore) for the 2010 Dodge Grand Caravan Passenger is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2010 Dodge Grand Caravan Passengers use lug bolts or lug nuts?
The 2010 Grand Caravan Passenger requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2010 Dodge?
The 2010 Grand Caravan Passenger uses a 5x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →