1997 Dodge Neon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Dodge Neon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 Neon — Year-Specific Fitment Context
The 1997 model year is the final year of the Dodge Neon's 4x100 bolt pattern run (since 1995). Wheels from any 1995–1997 Dodge Neon are cross-compatible with the 1997 model. Important: starting in 1998, Dodge switched to 5x100 — those wheels will not fit the 1997 model. Across its full production run (1995–2005), the Neon has also used: 5x100.
Dodge Neon Bolt Pattern by Year
The table below shows how the Neon's wheel specifications have changed over the years. The 1997 model year is highlighted.
Fitment Notes
The 1997 Dodge Neon has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Neon appears from 1995 to 2005 (11 model years).
Across model years, this model appears with 2 bolt patterns (4x100, 5x100).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
1997 Dodge Neon — Frequently Asked Questions
What is the bolt pattern for a 1997 Dodge Neon?
The 1997 Dodge Neon uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40mm.
What other years of Dodge Neon have the same bolt pattern as the 1997?
The Dodge Neon uses the 4x100 pattern from 1995 through 1997. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Will 1998 Dodge Neon wheels fit a 1997 model?
No. The 1998 Dodge Neon switched to a 5x100 bolt pattern, which is not compatible with the 1997 model's 4x100. Using mismatched patterns is unsafe.
Can I put aftermarket wheels on my 1997 Dodge Neon?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 40mm, and a center bore of at least 57.1mm (using hub rings if larger).
Do 1997 Dodge Neons use lug bolts or lug nuts?
The 1997 Neon requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 1997 Dodge Neon?
The OEM offset for the 1997 Neon is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Dodge Neon has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1995-2005 (11 model years).
- Observed bolt-pattern variants: 2 (4x100, 5x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1997 Dodge Neon, please report it via our About page contact so we can verify and update this record.