2000 Dodge Neon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Dodge Neon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 Neon — Year-Specific Fitment Context
The 2000 Dodge Neon is in year 3 of 8 using the 5x100 pattern (1998–2005). Wheels from any 1998–2005 Dodge Neon are cross-compatible with the 2000 model. Across its full production run (1995–2005), the Neon has also used: 4x100.
Dodge Neon Bolt Pattern by Year
The table below shows how the Neon's wheel specifications have changed over the years. The 2000 model year is highlighted.
Fitment Notes
The 2000 Dodge Neon has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Neon appears from 1995 to 2005 (11 model years).
Across model years, this model appears with 2 bolt patterns (4x100, 5x100).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
2000 Dodge Neon — Frequently Asked Questions
What is the bolt pattern for a 2000 Dodge Neon?
The 2000 Dodge Neon uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40mm.
What other years of Dodge Neon have the same bolt pattern as the 2000?
The Dodge Neon uses the 5x100 pattern from 1998 through 2005. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What is the center bore of a 2000 Dodge Neon?
The factory center bore (hub bore) for the 2000 Dodge Neon is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2000 Dodge Neon?
The OEM offset for the 2000 Neon is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 57.1mm center bore important for the 2000 Neon?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2000 Dodge Neon?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Dodge Neon has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1995-2005 (11 model years).
- Observed bolt-pattern variants: 2 (4x100, 5x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Dodge Neon, please report it via our About page contact so we can verify and update this record.