2010 Dodge Ram 1500 Quad Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Dodge Ram 1500 Quad Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 19 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2010 Ram 1500 Quad Cab — Year-Specific Fitment Context
The 2010 model year is the final year of the Dodge Ram 1500 Quad Cab's 5x139.7 bolt pattern run (since 1998). Wheels from any 1998–2010 Dodge Ram 1500 Quad Cab are cross-compatible with the 2010 model.
Dodge Ram 1500 Quad Cab Bolt Pattern by Year
The table below shows how the Ram 1500 Quad Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x139.7 | 77.8 | 19 |
| 1999 | 5x139.7 | 77.8 | 19 |
| 2000 | 5x139.7 | 77.8 | 19 |
| 2001 | 5x139.7 | 77.8 | 19 |
| 2002 | 5x139.7 | 77.8 | 19 |
| 2003 | 5x139.7 | 77.8 | 19 |
| 2004 | 5x139.7 | 77.8 | 19 |
| 2005 | 5x139.7 | 77.8 | 19 |
| 2006 | 5x139.7 | 77.8 | 19 |
| 2007 | 5x139.7 | 77.8 | 19 |
| 2008 | 5x139.7 | 77.8 | 19 |
| 2009 | 5x139.7 | 77.8 | 19 |
| ▸ 2010 | 5x139.7 | 77.8 | 19 |
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2010 Dodge Ram 1500 Quad Cab
For your 2010 Dodge Ram 1500 Quad Cab, the 5x139.7 bolt pattern is shared with 1998-2010 models. The 77.8mm center bore is critical; aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: stock is 19mm; deviations affect scrub radius and clearance. Avoid offsets beyond ±10mm without checking suspension and brake clearance. Use only 9/16" lug nuts with the correct seat (factory is cone seat). Never use ball-seat lugs; they can loosen. Torque to 130-150 ft-lbs and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Dodge Ram 1500 Quad Cab appears from 1998 to 2010 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, verify hub bore and use hub-centric rings if bore > 77.8mm.
- ✅ Check offset carefully; a 0mm offset may cause tire rub on control arms or fenders.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Dodge Ram 1500 Quad Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 Dodge Ram 1500 Quad Cab?
The 2010 Dodge Ram 1500 Quad Cab uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 19mm.
What other years of Dodge Ram 1500 Quad Cab have the same bolt pattern as the 2010?
The Dodge Ram 1500 Quad Cab uses the 5x139.7 pattern from 1998 through 2010. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the factory wheel offset for a 2010 Dodge Ram 1500 Quad Cab?
The OEM offset for the 2010 Ram 1500 Quad Cab is typically around 19mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2010 Dodge Ram 1500 Quad Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 19mm, and a center bore of at least 77.8mm (using hub rings if larger).
Will wheels from another Dodge fit my 2010 Ram 1500 Quad Cab?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
What is the center bore of a 2010 Dodge Ram 1500 Quad Cab?
The factory center bore (hub bore) for the 2010 Dodge Ram 1500 Quad Cab is 77.8mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset